Nokia C6-00 User Manual page 98

Select an accessory and from the
following:
Default profile — Set the profile that you
want activated each time you connect a
certain compatible accessory to your
device.
Automatic answer — Set the device to
answer an incoming call automatically
after 5 seconds. If the ringing type is set
to Beep once or Silent, automatic answer
is disabled.
Lights — Set the lights to remain on after
the time-out.
The available settings depend on the type
of accessory.
Application settings
Select Menu Settings
>
Application sett..
In application settings, you can edit the
settings of some of the applications in
your device.
To edit the settings, you can also select
Options Settings
>
Device updates
With Device updates, you can connect to a
server and receive configuration settings
for your device, create new server profiles,
view existing software version and device
information, or view and manage existing
server profiles.
Select Menu Settings
>
Phone mgmt.
>
If software updates over the air are
supported by your network, you may also
be able to request updates through the
device.
You may receive server profiles and
different configuration settings from your
service providers and company
98
and Phone
in each application.
and Phone
Device updates.
information management department.
These configuration settings may include
connection and other settings used by
different applications in your device.
Receive configuration settings
1 Select
2 Go to a profile, and select
Start
Create a server profile
Select Options
Options
Delete a server profile
Select Options
Security settings
> Phone and SIM
You can define security settings for your
device and SIM card. For example, you can
change access codes.
Select Menu
Phone mgmt.
Phone and SIM
Select from the following:
PIN code request — When active, the
code is requested each time the device is
switched on. Deactivating the PIN code
request may not be allowed by some SIM
cards.
PIN code, PIN2 code, and Lock
code — Change the PIN code, PIN2 code,
and lock code. These codes can only
>
include numbers from 0 to 9. Avoid using
access codes similar to the emergency
numbers to prevent accidental dialing of
the emergency number. If you forget the
PIN or PIN2 code, contact your service
provider. If you forget the lock code,
contact a Nokia Care point or your service
provider.
Options Server
>
configuration.
Server profiles
>
New server profile.
>
> Delete.
Settings and
>
Security settings
>
card.
© 2010 Nokia. All rights reserved.
profiles.
Options
>
>
Phone
>
>