Table 8. Wake-Up Devices And Events - Intel BLKD945GCLF - MB 533FSB DDR2 667 533 Aud+Vdo+Lan mATX Technical Product Specification

1.12.1.2 Wake-up Devices and Events
Table 8 lists the devices or specific events that can wake the computer from specific
states.

Table 8. Wake-up Devices and Events

These devices/events can wake up the computer...
LAN
PME# signal
Power switch
RTC alarm
Serial port
USB
PS/2 devices
Note 1: For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option
to Power On will enable a wake-up event from LAN in the S5 state.
Note 2: For PS/2 devices, if the computer is in an S4 or S5 state, only the key combination alt-PrtScn will
wake the computer.
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.
Product Description
...from this state
(Note 1)
S1, S3, S4, S5
(Note 1)
S1, S3, S4, S5
S1, S3, S4, S5
S3, S4, S5
S3
S3
S1, S3, S4, S5 (Note 2)
31