Usb - Intel BLKD945GCLF - MB 533FSB DDR2 667 533 Aud+Vdo+Lan mATX Technical Product Specification

1.6.2

USB

The board supports up to six USB 2.0 ports, supports UHCI and EHCI, and uses UHCI-
and EHCI-compatible drivers.
The ICH7 provides the USB controller for all ports. The port arrangement is as
follows:
• Four ports are implemented with dual stacked back panel connectors
• Two ports are routed to a separate front panel USB header
NOTE
Computer systems that have an unshielded cable attached to a USB port may not
meet FCC Class B requirements, even if no device is attached to the cable. Use
shielded cable that meets the requirements for full-speed devices.
For information about
The location of the USB connectors on the back panel
The location of the front panel USB headers
Product Description
Refer to
Figure 8, page 41
Figure 9, page 42
19