Call; Usb Data Cable - Nokia 6300 - Cell Phone 7.8 MB User Manual

User guide
Hide thumbs Also See for 6300 - Cell Phone 7.8 MB:
Table of Contents

Advertisement

Synchronize from a server
To use a remote internet server, subscribe to a synchronization service. For more
information and the settings required for this service, contact your service provider. You
may receive the settings as a configuration message. See "Configuration setting
service", p. 8.
To start the synchronization from your phone, select Menu > Settings >
Connectivity > Data transfer > Server sync.
Synchronizing for the first time or after an interrupted synchronization may take up to
30 minutes to complete.

USB data cable

You can use the USB data cable to transfer data between the phone and a compatible
PC or a printer supporting PictBridge.
To activate the phone for data transfer or image printing, connect the data cable, and
select the mode:
● Nokia mode — to use the cable for PC Suite
● Printing & media — to use the phone with a PictBridge compatible printer or with
a compatible PC
● Data storage — to connect to a PC that does not have Nokia software and use the
phone as a data storage device
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable and the desired USB mode.
Nokia PC Suite
With Nokia PC Suite you can manage your music, synchronize contacts, calendar, notes,
and to-do notes between your phone and the compatible PC or a remote internet server
(network service). You may find more information and PC Suite on the Nokia website.
See "Nokia support", p. 9.

Call

Select Menu > Settings > Call and from the following options:
● Call divert — to divert your incoming calls (network service). You may not be able
to divert your calls if some call barring functions are active. See "Security", p. 33.
● Voice clarity — to enhance speech intelligibility, especially in noisy environments
● Anykey answer — to answer an incoming call by briefly pressing any key, except
the power key, the left and right selection keys, or the end key
● Automatic redial — to make a maximum of 10 attempts to connect the call after
an unsuccessful call attempt
● Speed dialling — to dial the names and phone numbers assigned to the number
keys 2 to 9 by pressing and holding the corresponding number key
● Call waiting — to have the network notify you of an incoming call while you have
a call in progress (network service)
● Summary after call — to briefly display the approximate duration after each call
Settings
31

Advertisement

Table of Contents
loading

Table of Contents