Installation - Whirlpool AMW 498 IX Instructions For Use Manual

MOUNTING THE APPLIANCE
PRIOR TO CONNECTING
C on the rating plate corre-
HECK THAT THE VOLTAGE
sponds to the voltage in your home.
D
O NOT REMOVE THE MICROWAVE INLET PROTECTION
located on the side of
PLATES
the oven cavity wall. They
prevent grease & food par-
ticles from entering the mi-
crowave inlet channels.
E the oven cavity is
NSURE
empty before mounting.
E
NSURE THAT THE APPLIANCE IS NOT DAMAGED
that the oven door closes firmly against the
door support and that the internal door seal is
not damaged. Empty the oven and clean the
interior with a soft, damp cloth.
AFTER CONNECTING
T
HE OVEN CAN BE OPERATED ONLY
firmly closed.
2

INSTALLATION

F
OLLOW THE SUPPLIED
structions when installing the appliance.
D
O NOT OPERATE THIS APPLIANCE
mains cord or plug, if it is not working proper-
ly, or if it has been damaged or dropped. Do
not immerse the mains cord or plug in water.
Keep the cord away from hot surfaces. Electri-
cal shock, fire or other hazards may result.
D
O NOT USE EXTENSION CORD
. Check
if the oven door is T
HE EARTHING OF THIS APPLIANCE
manufacturer will accept no responsibility for
injury to persons, animals or damage to ob-
jects arising from the non-observance of this
requirement.
The manufacturers are not liable for any
problems caused by the user's failure to ob-
serve these instructions.
separate mounting in-
if it has a damaged
:
I
F THE POWER SUPPLY CORD IS TOO SHORT
a qualified electrician or serviceman in-
stall an outlet near the appliance.
is compulsory. The
, have