Checking Total Memory - Toshiba U945-S4380 User Manual

4 Replace the memory module slot cover and secure it using the
screw.
5 Re-insert the main battery. For more information on inserting
the main battery, see
6 Turn the computer right side up. Make sure to remove the soft
cloth from the work surface before restarting the computer.
7 Reconnect the cables.
8 Restart the computer.
Upon restarting your computer, touch any key to return to the login
in screen.

Checking total memory

When you add or remove a memory module, you can check that the
computer has recognized the change. To do this:
Press the (
The System window appears. Installed memory (RAM) is
displayed below the System heading.
Always make sure your computer and AC adaptor have adequate
ventilation and are protected from overheating when the power is turned
on or when an AC adaptor is connected to a power outlet (even if your
computer is in Sleep mode). In this condition, observe the following:
❖
Never cover your computer or AC adaptor with any object.
❖
Never place your computer or AC adaptor near a heat source,
such as an electric blanket or heater.
❖
Never cover or block the air vents including those located at the
underside of the computer.
❖
Always operate your computer on a hard flat surface. Using your
computer on a carpet or other soft material can block the vents
located at the underside of the computer.
Overheating your computer or AC adaptor could cause system
failure, computer or AC adaptor damage or a fire, possibly resulting
in serious injury.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
) + keys, and then click System.
X
Getting Started
Adding memory (optional)
"Inserting a charged battery" on page
51
88.