Table of Contents
Advertisement
Important! Do not accept the default entry as this is a guess
based on returned information.
• If your network requires SSL encryption, tap the Use secure
connection (SSL) field to place a check mark in the box and
activate this additional level. Most often, this option should be
enabled.
• If your network requires that you accept SSL certificates, tap
the Accept all SSL certificates field to place a check mark in
the box and activate this additional level. Most often, this option
is not required. Confirm this information with your IT
Administrator.
Important! If your Exchange server requires this feature,
leaving this field unchecked can prevent
connection.
9. Consult your IT Administrator if it is necessary to
enable the Use client certification option.
10. With the new server information entered, tap Next.
11. Read the on-screen Activation disclaimer and, when
prompted, tap OK. The device then verifies your
incoming server settings.
12. If prompted, read the Remote security administration
information and tap OK to accept the service and
continue.
13. Adjust the various on-screen configuration fields and
tap Next. It may take a few seconds for the next screen
to load.
• Enabling the Automatically download attachments when
connected to Wi-Fi option decreases the wait time to access
large email attachments.
14. If prompted, read the Activate device administrator?
screen and tap Activate to complete the email setup
process.
Note: This process can take a few minutes. If the previous
setup screen re-appears, ignore it and do not alter any
fields during this process.
15. Identify your new work email account with a unique
name (Ex: Work), then tap Done.
Messages
139
Advertisement
Table of Contents
