Samsung DP500A2D User Manual page 54

Using a wireless keyboard/mouse
If the wireless mouse does not work
► When the power switch at the bottom of the mouse is in the
OFF position, the mouse does not work.
Turn the switch to the ON position.
► Check the batteries.
► Check the status of the wireless signal receiver.
1
Set the power switch at the bottom of the mouse to the OFF
position.
(Optional)
CONNECT
button
Power switch
2
Disconnect and then reconnect the wireless signal receiver to
the main body.
3
Set the power switch at the bottom of the mouse to the ON
position.
4
Within 30 seconds of reconnecting the receiver, press and
hold the CONNECT button for 1 seconds near the receiver.
5
Check if the device works properly.
Chapter 3.
53
Using the computer