Samsung DP500A2D User Manual page 24

Overview
Launches the volume control menu.
When the volume control menu is running,
5
press
Volume Control
Switches to PC mode or monitor mode.
PC Mode: The mode that maintains the
screen of this product.
Monitor Mode: The mode used when this
6
product is used as a monitor.
Mode Selection
Turns the LCD on or off.
For models that support monitor mode, this
button turns both the LCD and the speaker
on or off at the same time.
7
LCD On/Off
to turn the volume up or press
to turn the volume down.
Source is used to switch between PC
and Monitor modes when the system is
in use.
When the system is hibernating or
shutdown, press the LCD on/off button
to use the product in Monitor mode.
Caution when using the touch buttons
• You can only use the touch buttons when the computer is
turned on.
• Touch the touch buttons with clean, dry hands.
In a humid environment, use the buttons after first removing
moisture from your fingers or the touch buttons.
• Since the touch buttons will work even if you do not press
them hard, do not press them excessively.
Since a serious impact may damage the sensor in the touch
button, take care when using the buttons.
• Do not press the buttons with sharp objects such as a stylus
pen, ball-point pen, etc. Sharp objects may damage the touch
buttons.
• When you touch the touch buttons, take care not to touch
another button so that your finger tip touches the touch
buttons precisely corresponding to the required function.
• When you are wearing gloves or the touch buttons are covered
with plastic packaging or some kind of protective covering, the
touch buttons may not work properly.
• If a conductive object such as a metal object makes contact
with the touch buttons, the touch buttons may malfunction.
Therefore, take care not to touch the touch buttons with a
conductive object.
Chapter 1
23
Getting Started