Philips BDL3221V/27 User Manual page 50

Troubleshooting
Screen image is too
small
Cannot adjust the
LCD Monitor with
the buttons at the
side of the unit
For further assistance, refer to the
Philips distributor.
OSD Warning Messages
A warning message may appear on the screen indicating the LCD Monitor current status.
file:///D|/My%20Documents/dfu/BDL_27/english/320wn6/SAFETY/saf_troub.htm (5 of 6)2006-03-10 1:30:38 PM
Image is centered
on screen, but
does not fill entire
viewing area
OSD does not
appear on the
screen
Consumer Information Centers
RETURN TO TOP OF THE PAGE
Perform the LCD Monitor factory reset (via
Menu -> Factory Reset -> All Settings).
Turn the LCD Monitor off and unplug the
power cord and then plug back and power on.
list and contact your local
When user sees this warning message, it means
that the LCD Monitor is in adjustment process.
A warning message may appear on the screen
indicating that the LCD Monitor is out of sync
range.
See Specifications for the Horizontal and Vertical
frequency ranges addressable by this the LCD
Monitor. Recommended mode is 1360 x 768 @
60Hz.