Replacing Ink Cartridges - Epson XP-850 Quick Manual

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You must install new cartridges
immediately after removing old ones.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Leave the expended cartridge installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
Note: If you remove a low or expended ink cartridge, you cannot reinstall and use the
cartridge.
1. Turn on your product.
2. If an ink cartridge is expended, you see a message on the LCD screen indicating which
color to replace.
If you're replacing a cartridge before you see a message on the LCD screen, select
>
Setup Ink Levels
Note: If a cartridge is expended, you must replace it to be able to print. If a
cartridge is low, you can continue printing until a cartridge needs replacement.
3. Lift up the scanner unit.
Caution: Do not move
the print head by hand;
otherwise, you may
damage your product.
Do not touch the flat
white cable inside the
printer.
4. Push in the blue tab to unlock the ink cartridge you are replacing. Then lift the
bottom of the ink cartridge to remove it.
Warning: If ink gets on your skin, wash it off thoroughly with soap and water. If it
gets in your eyes, flush them immediately with water. If you still have discomfort
or vision problems, see a doctor immediately. Keep ink cartridges out of the reach
of children and don't allow them to drink the ink.
>
Cartridge Replacement
.
Maintaining Your Product
29