Maytag MVWB800VQ - Bravos Washer With Window Lid Use And Care Manual page 18

6.
7.
For a longer delay time, press DELAY START + (plus). For a shorter delay time, press
DELAY START - (minus). The Start time will increase or decrease by 1 -hour steps.
Press START/PAUSE. The countdown in hours and minutes to the wash cycle will show
in the time display window and the indicator light will begin to flash.
NOTE: The Start/Pause indicator light will not flash when Delay Start is chosen. You must
press Start/Pause to initiate a countdown for the cycle to begin. The cycle selections and
modifiers are lit during the Delay Start time.
To cancel Delay Start:
Press POWER/CANCEl_ once to cancel Delay Start or press START/PAUSE to cancel the
countdown and start the cycle.
Use these pads to select or dese[ect the options for your wash cycle. Options may add time
to the wash cycle.
options
Water save 1
spray rinse
fabric 1
softener
oxi treat 1
stains
extra rinse i
clean boost 1
with heater
end signal 1
off- low- hi
Water Save Spray Rinse
The Water Save Spray Rinse option reduces rinse water in the cycle. This option is available
on most cycles and must be selected prior to the start of the cycle. Do not use liquid fabric
softener with the Water Save Spray Rinse option. Select the Fabric Softener option if using
liquid fabric softener to assure proper dispensing.
Oxl Treat Stains
This washer is designed to dispense laundry boosters such as oxygenated stain treaters and
color-safe bleach at the right time in the cycle for best cleaning performance. Do not use
laundry boosters and chlorine bleach in the same cycle.
Clean Boost with Heater
The Clean Boost with Heater option helps to ensure better soil and stain removal. Clean
Boost uses a heater within the washer to maintain the selected temperature setting throughout
the wash period. This option will add some additional time to the cycle based on which
temperature is selected. It is a preset cycle setting on the Sanitary and Super Wash cycles.
Clean Boost with Heater may be selected as an option with other cycles. See table for details.
Cycle Clean Boost with Heater
Sanitary with Oxi Default
Super Wash Default
Whites O _tion
Bulky O _tion
Sheets O _tion
Normal O _tion
Wrinkle Control O _tion
Darks/Colors O _tion
Rapid Wash O _tion
Hand Wash O _tion
Clean Washer with AFFRESH'" Not available
Soak Not available
Rinse & Spin Not available
Drain & Spin Not available
Fabric Softener
Fabric- Softener option must be selected if liquid fabric- softener is added to the fabric- softener
dispenser. Fabric softener wii[ also be dispensed in the last rinse of the Extra Rinse cycle, if
selected. This option flushes the dispenser at the correct time in a deep water rinse for optima[
distribution.
Extra Rinse
An Extra Rinse can be used to aid in the removal of detergent or bleach residue, or particulates
such as sand and lint, from the load. This option provides an additional rinse with the same
water temperature as the first rinse. This is the default rinse setting for the Whites cycle.
End Signal - Off - Low - Hi Cycle Volume
The End Signal produces an audible sound when the wash cycle is finished. This signal is
helpful when you are removing items from the washer as soon as it stops. Select Off, Low,
or Hi for volume sound.
18