Service Mode; Continuous Run Mode - Samsung WF365BTBGWR/A1 Technical Information

Trouble shooting guide user manual ver.1.0 (english, french, spanish)
Hide thumbs Also See for WF365BTBGWR/A1:
Table of Contents

Advertisement

Available languages

Available languages

ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.

Continuous Run Mode

Definition of Continuous Run Mode:
- Will continuously repeat the current cycle until the Continuous Run Mode is cancelled.
How to Enter:
- Press Delay Start Key + Child Lock Key(Spin+SoilLevel) together for 7 sec.
Continuous Run Mode:
1. Press Delay Start Key + Child Lock Key(Spin+SoilLevel) for 7 sec during Power On State (Normal
User Mode) .
2. Once in Continuous Run Mode, The seven segments will no longer display "0000" and will alternate
between displaying the number of cycles of the completed course and the remaining time of the course.
3. The Continuous Run Mode will repeat the previous cycle until continuous run mode is cancelled.
4. During Continuous Run Mode, press Delay Start Key + Child Lock Key(Spin+SoilLevel) for 7 sec to
return to normal user mode. The seven segments will no longer display the number of cycles and
will display the maintenance time only.
5. If you exit Service Mode after entering it from Continuous Mode, the washing machine returns
to Continuous Mode.
6. If power is lost in Continuous Run Mode (that is, when the power plug is disconnected or the
Power key is pressed turning the washing machine off ), the mode is released when the washing
machine is turned on again.

Service Mode

Definition of Service Mode:
- Service Mode enables service technicians to verify the operation of the washing machine and
do troubleshooting.
- Service Mode can be entered during all washing cycle without interrupting the cycle except
some of test modes.
- Various tests can be done with Service Mode. So, troubleshooting can be done based on the
resulting diagnostic codes.
How to Enter:
- To enter the Service Mode, press the DelayStart + Spin Key for 3 seconds or until the unit sends
out beeping sounds.
[BIGBANG]Technical_information-03207A_EN_20120531.indd 6
WARNING
6
2012-05-31
2:47:05

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wf361bvbewr/a1Wf363btbeuf/a1

Table of Contents