Led Indicators Of Cycle Sequence - Bosch WTVC8530UC - Vision 800 Series Gas Dryer Operating And Installation Instructions

LED Indicators of Cycle
Sequence
The dryer uses an electronic scanning
system for all cycles except the time
cycles. A moisture sensor continuously
checks the moisture in the laundry.
Drying ends automatically as soon as
the selected degree of dryness has
been reached.
LED Indicators Vary by Model
300 Series Dryer LED's
The current degree of drying is
represented by usiAg-LED indicator
lights. Each light is illuminated in
succession as drying progresses.
The LED to the left of "Drying"
illuminates when the selected drying
cycle begins. On select models, LED
lights for "Damp Dry" and "Regular Dry"
indicate as each stage is reached.
When the load is finished the LED
beside "Wrinkle BlocWFinished" is
illuminated.
500 Series Dryer LED's
"Wrinkle Block/Finished"
The drum continues to rotate at
specific intervals to help decrease
wrinkling of the laundry load. Remove
the laundry when the cycle is finished,
or within the Wrinkle Block® period for
best results.
Wrinkle Block® begins when the drying
phase ends for every cycle except the
wool cycle. Following the end of a
drying cycle, Wrinkle Block® turns the
drum for about 16 seconds every two
minutes for the first 10 minutes, then
about 16 seconds every 5 minutes for
the next 50 minutes.
800 Series Dryer LED's
Drying
Wrinkle Block/
Finished
il _i i iii
L nt ter
D If any LED or button is illuminated
on the panel when the cycle
selector is turned to the "Off"
position, please turn off the circuit
breaker and call customer service.
23