Main Motor Assy And Motor Heat Sink; Gears And Solenoid - Brother HL-720 - B/W Laser Printer Service Manual

3.13

Main Motor Assy and Motor Heat Sink

(1) Remove the two screws securing the main motor assy.
(2) Remove the two screws securing the motor heat sink.
3.14

Gears and Solenoid

(1) Apply grease the point as shown below.
Grease:
NOTE: Apply EM-30L to the small gears (2 pcs.) inside "Gear 45 arm assy".
MOLYKOTE EM-30L TKC-0
MOLYKOTE EM-D110
Fig. 3.14
Fig. 3.15