Workstation Configuration:
On each workstation that you wish to print from, execute the
following step:
Go to the DOS or OS/2 command prompt and enter the command:
NET USE LPTx: \\NodeName\ServiceName
Where x is the LPT port number (1 through 9), NodeName is the
NetBIOS Name of the print server (usually BRN_xxxxxx by default,
where xxxxxx is the last six digits of Ethernet address) and
ServiceName is the service name of the print server (BINARY_P1
by default).
For example:
NET USE LPT2: \\BRN_310107\BINARY_P1
You can find the NetBIOS name and MAC address by
printing out the Network Configuration Page. See How to
Print a Network Configuration Page on page A-8 for
information on how to print the Network Configuration Page
on your print server.
Other Sources of Information
1
Visit http://solutions.brother.com for more information on
network printing.
2
Refer chapter 9 of this User's Guide to learn how to configure
the IP address of the printer.
NETBIOS PEER TO PEER PRINTING 4 - 9