NETWORK menu
Table B-1 shows the list of the NETWORK menu.
In order to make your wireless settings effective, you must
select the APPLY option from the WIRELESS menu and
then select YES or YES AND REPORT. If you do not do this,
the network settings will not be used unless you switch the
printer off and then on again.
Table B-I NETWORK menu
Display Shows
TCP/IP
NETWARE
APPLETALK
NETBIOS/IP
Description
Subsetting
TCP/IP ENABLE
IP ADDRESS=
SUBNET MASK=
GATEWAY=
IP BOOT TRIES
IP METHOD
APIPA
NETWARE ENABLE
NETWARE FRAME
=ON/OFF
=ON/OFF
Description
=ON/OFF
=0.0.0.0 .....
255.255.255.255
=0.0.0.0 .....
255.255.255.255
=0.0.0.0 .....
255.255.255.255
=0 ..... 3267
=AUTO, STATIC, RARP,
BOOTP, DHCP
=ON/OFF
=ON/OFF
=AUTO, 8023, ENET, 8022,
SNAP
APPENDIX B - 6