Sanyo PDG-DWT50L - WXGA DLP Projector User Manual page 85

5. Using On-Screen Display
I
TEM
Key lock
DynamicBlack
RC sensor
Network setting
Standby mode
PC control
Ceiling & Rear
Ceiling & Rear enables you to set how the projected image is displayed.
Select from the following:
Desktop Front – Standard forward facing projection (Default setting).
Desktop Rear – Standard rear projection. Enables the projector to produce the image from behind the screen by reversing
the image.
Ceiling Front – Forward facing ceiling mounted projection. Enables ceiling mounted projection by inverting the image.
Ceiling Rear – Rear ceiling mounted projection. Enables ceiling mounted projection from behind the screen by inverting
and reversing the image.
Set Control panel lock On/Off.
Note:
This Control Panel Lock does not affect the remote control functions.
When the control panel is locked, pressing and holding the Cancel button
on the projector cabinet for about 10 seconds. The setting will change to Off.
TM
DynamicBlack improves the black level of the projector. Black level is the darkest
part of a picture and varies between viewing devices and environments.
Set DynamicBlack on/off.
Set RC sensor fields.
Range: Both, Front, Back
Opens Network preferences tab (see Network setting on page 82).
Select Standby mode.
Range: Normal and Power-saving
Enables the path selection for PC control.
Range: PC control or Network.
Desktop front
Desktop rear
D
ESCRIPTION
Ceiling rear
Ceiling front
76