Sanyo PDG-DWT50L - WXGA DLP Projector User Manual page 75

5. Using On-Screen Display
Color matrix
Color Matrices define the amount of the three-color components R (red), G (green), and B (blue) in a single point in color
space.
Select from the following:
Auto – Auto selects the color matrix.
RGB – Sets the color matrix to RGB, use for PC monitor or camera imaging.
SDTV – Sets the color matrix to SDTV, use for Standard Definition imaging.
HDTV – Sets the color matrix to HDTV, use for High Definition imaging.
Film
Film aids in converting motion picture film images into video. The process adds additional frames to the picture in order to
increase the frame rate.
Note:
This feature is only available when Progressive is turned on and SDTV
signal is selected.
Select from the following:
Off – Film mode is turned off.
2-2/2-3 Auto – Detects pull-down correction method.
2-2 On – Uses 2-2 pull-down correction method.
2-3 On - Uses 2-3 pull-down correction method.
66