Appendix B: Manual Plug-And-Play Installation Of Supported Printers - HP 2533t - Compaq Mobile Thin Client Printing Manual

Printers supported when locally attached
The following printers are supported locally-attached to the thin client via a USB or parallel
connection, and will be detected and installed automatically via plug-and-play:
Supported with plug and play
1320 series 2420 series
3052 AiO 3055 AiO
4700 series 4730 MFP series
CM3530 MFP series CM4730 MFP series
CP4005 series M2727 MFP series
M5025 MFP M5035 MFP series
Appendix B: Manual plug-and-play installation of supported
printers
If a printer is not listed as supported locally-attached, but it is supported when network-attached, it
may still work when locally attached – however no guarantee is made in that regard; careful testing
should be made in a variety of print scenarios to attest that the device is working as expected.
Using the "Found new hardware" dialog
When a printer not supported locally-attached is first connected to the thin client, a plug-and-play
"Found new hardware" dialog will pop-up. One can manually force the device to use the UPD for
Thin Clients driver by executing the steps that follow:
1 – On the first step of the "Found New Hardware Wizard", select the option "No, not at this time"
and click "Next":
2 – On the second wizard step, shown below, select "Install from a list of specific location
(Advanced)" and click "Next":
2605 series 2700 series
3390 AiO 3392 AiO
5200 series 5550 series
CP2020 series CP3505 series
M3027 MFP series M3035 MFP series
P2015 series P2050 series
3050 AiO
4345mfp series
CM2320 MFP series
CP3520 series
M4345 MFP series
P3005 series
9