Connecting To A Local Area Network - HP 2533t - Compaq Mobile Thin Client User Reference Manual
Mobile thin client
Hide thumbs
Also See for 2533t - Compaq Mobile Thin Client:
- Maintenance and service manual (116 pages) ,
- Administrator's reference manual (112 pages) ,
- Getting started (62 pages)
Table of Contents
Advertisement
5.
Click Modem.
6.
Clear the check box for Wait for dial tone before dialing.
7.
Click OK twice.
NOTE:
"Enhanced Write Filter," for additional information.
Connecting to a local area network
Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.
To connect the network cable:
1.
Plug the network cable into the network jack (1) on the computer.
2.
Plug the other end of the cable into a network wall jack (2).
WARNING!
modem or telephone cable into the RJ-45 (network) jack.
50
Chapter 8 Modem and LAN
You must commit these changes in order for them to be saved. Refer to Chapter 2,
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a
Advertisement
Table of Contents
Need help?
Do you have a question about the 2533t - Compaq Mobile Thin Client and is the answer not in the manual?
Questions and answers