System Configuration Menu - HP 2533t - Compaq Mobile Thin Client Administrator's Reference Manual

System Configuration menu

NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select
Language (or press f2)
Boot Options
Device Configurations
Built-In Device Options
Port Options
To do this
Change the Computer Setup language.
●
Set an f9, f10, and f12
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot.
●
Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.
● Set the boot order.
●
Swap the functions of the
● Enable/disable USB legacy support. When enabled, USB
legacy support allows the following:
◦
Use of a USB keyboard in Computer Setup even
when a Windows operating system is not running.
◦ Startup from bootable USB devices, including a hard
drive, diskette drive, or optical drive connected by a
USB port to the computer.
● Enable/disable embedded WLAN Device Radio.
●
Network Interface Controller (LAN)
● LAN/WAN switching
●
Enable/disable Wake on LAN.
● Enable/disable the optical disc drive.
●
Enable/disable the USB port.
● Enable/disable the PC Card slot.
●
Enable/disable flash media reader.
Computer Setup menus
delay when starting up.
fn key and left ctrl key.
95