Restoring Factory Settings In Computer Setup - HP 2533t - Compaq Mobile Thin Client Administrator's Reference Manual

Mobile thin client

Hide thumbs Also See for 2533t - Compaq Mobile Thin Client:

Table of Contents

Restoring factory settings in Computer Setup

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

Open Computer Setup by turning on or restarting the computer, and then pressing

"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.

Use the arrow keys to select File > Restore defaults, and then press enter.

When the confirmation dialog box opens, press f10.

To save your changes and exit Computer Setup, use the arrow keys to select File > Save changes

and exit. Then follow the on-screen instructions.

Your changes go into effect when the computer restarts.

NOTE:

Your password settings and security settings are not changed when you restore the factory

settings.

f10

while the

Using Computer Setup

Table of Contents

Do you have a question about the 2533t - Compaq Mobile Thin Client and is the answer not in the manual?