Disabling A Port - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual
Hp storageworks c-series iscsi configuration guide (aa-rw7pe-te, december 2006)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Messages manual (518 pages)
Table of Contents
Advertisement
Figure 45 Disabling a port
6.
Click Apply and then click Save.
Verifying VLAN settings
After disabling the XConnects, verify that each port used in the iSCSI setup is enabled and is part of the
same VLAN. To do this, click DASHBOARD at the top of the BBI main window and navigate to Switch >>
Switch Ports
(Figure
NOTE:
All ports are members of the same VLAN (PVID 1).
Verify the VLAN settings for Interconnects A and B.
46). Ports 1 to 12, 22, and 24 are operational and enabled.
C-Series iSCSI
47
Advertisement
Table of Contents
