Create A Vdisk Family Window; Vdisk Active Member Properties - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

4.
Click Next step.
The next Create a Vdisk Family window appears
Figure 19 Create a Vdisk Family window, Page 2
5. Enter a number in the Available LUN for this host box.
The LUN is sent to the iSCSI host.
6. Click Finish.
7. Repeat the procedure to create additional LUNs as needed.
The new LUNs are listed under the Virtual Disks folder
Figure 20 Vdisk Active Member Properties
The new LUN is available to the iSCSI Initiator. To verify the availability of the LUN:
1. Return to the Microsoft iSCSI Initiator Properties window.
2. Click Active Sessions.
3. Select the appropriate Session Name, and then click Details.
The LUN appears in the Session Details list
28
(Figure 19).
(Figure 20).
(Figure 21).