Cisco AJ732A - MDS 9134 Fabric Switch Quick Reference Manual page 55

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 21
MIB
CISCO-ENTITY-EXT-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-ENTITY-SENSOR-MIB
CISCO-FC-ROUTE-MIB
CISCO-IMAGE-UPGRADE-MIB
CISCO-VIRTUAL-NW-IF-MIB
Extending the IF-MIB
The IF-MIB provides basic management status and control of interfaces and sublayers within a network
device. Multiple standard and Cisco-specific MIBs use ifIndex from the IF-MIB to extend management
for specific interface types. Cisco MIBs also enhances the two interface notifications, linkUp and
linkDown, from the IF-MIB to provide a clearer indication of the reason for these notifications. Cisco
MIBs add up to two varbinds to linkUp and linkDown as shown in
Table 22
Notification
linkUp
linkDown
1. Added for Fibre Channel interfaces only. Refer to the CISCO-FC-FE-MIB.
Refer to the Cisco MDS 9000 Family CLI Configuration Guide for details about enabling link
notifications that use these additional varbinds.
OL-18087-01, Cisco MDS NX-OS Release 4.x
ENTITY-MIB Extensions (continued)
Description
Extends the entityPhysicalTable for modules with
processors. For each of these modules, this MIB provides
memory statistics and LED information.
Manages field-replaceable units, such as power supplies,
fans, and modules.
Provides sensor data for environmental monitors such as
temperature gauges.
Provides ingress traffic counters for Fibre Channel, linked to
entPhysicalIndex.
Provides module image management based on
entPhysicalIndex.
Maps VSAN ID to FC ID and ifIndex, based on
entPhysicalIndex.
Varbinds Added to IF-MIB Notifications
Varbinds Added
1
fcIfOperMode , ifDescr
1
fcIfOperStatusCause , ifDescr
Table 22.
Cisco MDS 9000 Family MIB Quick Reference
Extending the IF-MIB
55