Cisco AJ732A - MDS 9134 Fabric Switch Quick Reference Manual page 47

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
CISCO-RSCN-MIB
This MIB monitors the Fibre Channel Registered State Change Notification (RSCN) functionality,
which is specified by FC-FLA and FC-FS. RSCN is a Fibre Channel service that informs hosts about
changes in the fabric. Hosts can receive this information by registering with the fabric controller. This
MIB lists which ports are registered for RSCN, and it provides global and per VSAN statistics on RSCN.
CISCO-SANTAP-MIB
This MIB configures the CVT for the SANTap service on the Fibre Channel switch modules.
SANTap is a Fibre Channel switch-based capability that provides a reliable copy of the data flowing
between a set of one or more initiators and a set of one or more targets connected to the fabric.
Administrators must configure the switch to create the CVT for the SANTap service. CVTs are used to
implement the control paths that process all SANTap service requests sent out by a device.
CISCO-SCSI-FLOW-MIB
This MIB configures and monitors Small Computer System Interface (SCSI) flows. A SCSI flow is a
monitored connection between a SCSI initiator and a SCSI target. The initiator should be connected to
a port on the local switch. The target can be present anywhere in the fabric. A SCSI flow is identified
uniquely by a SCSI flow ID. The statistics gathered per flow and per LUN include SCSI reads, writes,
transmit bytes, receive bytes, transmit frames, and receive frames.
CISCO-SCSI-MIB
This MIB is the Cisco version of the SCSI-MIB from the Internet Draft (draft-ietf-ips-scsi-mib-03.txt).
In terms of object syntax and semantics, the content of this Cisco MIB is the same as the corresponding
Internet Draft revision. This Cisco MIB was created because of the "subject to change" nature of Internet
Drafts. This Cisco MIB may eventually be replaced by a stable RFC.
This MIB configures and monitors SCSI entities. SCSI entities include SCSI devices, SCSI targets and
initiators, and SCSI ports.
CISCO-SECURE-SHELL-MIB
This MIB provides management of the SSH protocol. SSH provides secure communications between the
network management application and the managed device.
CISCO-SME-MIB
This MIB module manages Storage Media Encryption (SME) service. SME is an encryption service
provided by an encryption node residing on a line card in a storage device. It receives clear-text data
from the host, encrypts and then sends it to be written to tape or disk. It does the reverse in the opposite
direction so the service is completely transparent to the host. The purpose of this service is to enhance
data security in case the tape or disk is lost or stolen.
OL-18087-01, Cisco MDS NX-OS Release 4.x
Cisco-Specific MIBs Supported in the Cisco MDS 9000 Family
Cisco MDS 9000 Family MIB Quick Reference
47