Cisco AJ732A - MDS 9134 Fabric Switch Quick Reference Manual page 50

Cisco-Specific MIBs Supported in the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
TPC derives its name from the fact that there are three entities involved in the process of copying data,
either for backup or restore operations. These entities are as follows:
•
•
•
The entity originating the copy commands to perform the data transfer can use XCOPY. The TPC feature
exposes a disk target with a Logical Unit Number (LUN) 0 that is capable of processing the XCOPY to
transfer data from a specified source to a specified destination. On receiving the XCOPY command, the
TPC target performs the actual data transfer from the data source to the data destination on behalf of the
entity issuing the XCOPY command.
CISCO-VIRTUAL-NW-IF-MIB
This MIB manages virtual network interfaces to VSANs and VLANs. This MIB is used in conjunction
with ENTITY-MIB, IF-MIB, CISCO-IF-EXTENSION-MIB, and CISCO-IP-IF-MIB. This MIB
monitors the operational status of these virtual network interfaces.
CISCO-VSAN-MIB
This MIB manages VSANs within the framework of the Cisco VSAN architecture. This MIB enables
you to create and monitor VSANs. VSANs provide isolation among devices that are physically
connected to the same fabric. With VSANs you can create multiple logical SANs over a common
physical infrastructure.
CISCO-VSAN-CAPABILITY
The CISCO-VSAN-CAPABILITY provides the implementation details for the CISCO-VSAN-MIB, as
implemented in the Cisco MDS NX-OS or SAN-OS.
CISCO-WWWNMGR-MIB
This MIB manages the WWN manager functions. The WWN manager on a Cisco MDS 9000 Family
switch assigns WWNs to each switch, independent of other WWN managers on other switches. This
MIB provides statistics on the limited number of WWNs available to the switch and details on each type
of WWN provided.
CISCO-ZS-EXT-MIB
This MIB manages zoning within the framework of the Cisco zone server architecture, which realizes
the FC-GS4/SW3 requirements for a zone server. This MIB is an extension to the CISCO-ZS-MIB,
which is for managing zoning conforming to FC-GS3/SW2. Refer to
specification.
Cisco MDS 9000 Family MIB Quick Reference
50
Entity originating the copy command
Data source for the copy
Data destination for the copy
http://www.t11.org for the FC-GS4
OL-18087-01, Cisco MDS NX-OS Release 4.x