Cisco AJ732A - MDS 9134 Fabric Switch Quick Reference Manual page 27

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
CISCO-COMMON-ROLES-MIB
This MIB manages the common roles between access methods, such as the CLI, SNMP, and XML
interfaces. Every user on a device is associated with a role. A user role defines access rights afforded to
the users that belong to this role. A role specifies which commands or operations a user can perform on
which information.
This MIB describes a framework in which a role is defined independent of access methods. It is up to
the particular access method to convert this framework information into native information. For
example, SNMP needs to convert common role framework to VACM.
Note that this framework could also be used for access methods other than SNMP, XML, and CLI.
The framework needs a list of features and a list of operations they can support. The features provide the
data context and are system dependent. The operations are the actions that can be performed on the data.
The roles are defined in terms of rules. The rules are essentially access rights that specify whether or not
a certain operation is permitted on a feature.
CISCO-CONFIG-COPY-MIB
This MIB facilitates copying configuration files for a Cisco MDS 9000 Family switch in the following
ways:
•
•
•
CISCO-DIFFSERV-EXT-MIB
This MIB extension to DIFFSERV-MIB (RFC 3289) defines a Fibre Channel multifield filter to be used
in conjunction with DIFFSERV-MIB. It also helps in associating differentiated services classifiers to
interfaces on a VSAN through the cdsmDataPathTable defined in this MIB.
CISCO-DIFFSERV-MIB-CAPABILITY
The CISCO-DIFFSERV-MIB-CAPABILITY provides the implementation details for the
CISCO-DIFFSERV-MIB, as implemented in the Cisco MDS NX-OS or SAN-OS.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© <2009> Cisco Systems, Inc. All rights reserved.
Copying running or startup configurations to or from the network (using a protocol such as tftp, ftp,
scp, or sftp).
Copying running configurations to startup configurations and vice versa.
Copying a running or startup configuration to a file on the local Cisco MDS NX-OS or SAN-OS file
system and vice versa.