Figure 60 F_Port Trunking Dialog Box - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

3. Select any port from the port group in which you want to create the trunk group.
4. Select F_Port Trunking.
5. Select one or more ports in the Ports for trunking pane.
6. Select the trunk index from the drop-down box populated with the index for all the ports.
7.
8. Additional ports can be added by selecting a port, then selecting Add Members.
9. Click OK when you are finished.
Web Tools Administrator's Guide
53-1001194-01
The F_Port Trunking dialog box displays (see
FIGURE 60
F_Port trunking dialog box
A dialog box displays, asking you to select a trunk index.
A trunk group is created, identified by the trunk index, and containing the port you selected.
Select the trunk group you just created.
Add Members becomes active.
To remove a port from the trunk group, select the port and then select Remove Members.
F_Port trunk groups
Figure 60)
7
115