Troubleshooting; Troubleshooting Troubleshooting Troubleshooting Troubleshooting - Canon iP6310D - PIXMA Color Inkjet Printer Printing Manual

Troubleshooting

Troubleshooting
Troubleshooting Troubleshooting
Let's take a look at countermeasures against troubles which may occur during use of the printer.
Here, we will discuss errors indicated on the LCD, problems that might
occur during direct printing from the digital camera. If you cannot find the
symptom corresponding to a certain problem, refer to the User's Guide .
" " " " An Error Message is Displayed on the LCD An Error Message is Displayed on the LCD An Error Message is Displayed on the LCD" on page 43 An Error Message is Displayed on the LCD
" " " " POWER Lamp and Alarm Lamp Flash Alternately POWER Lamp and Alarm Lamp Flash Alternately" on page 45
POWER Lamp and Alarm Lamp Flash Alternately POWER Lamp and Alarm Lamp Flash Alternately
" " " " An Unintended Language is Displayed on the LCD An Unintended Language is Displayed on the LCD An Unintended Language is Displayed on the LCD An Unintended Language is Displayed on the LCD" on page 45
" " " " Ink Does Not Come Out/ Printing is Blurred/Colors are Wrong/White Streaks Ink Does Not Come Out/ Printing is Blurred/Colors are Wrong/White Streaks" on page 45 Ink Does Not Come Out/ Printing is Blurred/Colors are Wrong/White Streaks Ink Does Not Come Out/ Printing is Blurred/Colors are Wrong/White Streaks
" " " " Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is Scratched Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is Scratched" on
Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is Scratched Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is Scratched
page 46 page 46
page 46 page 46
" " " " Paper Jams Paper Jams Paper Jams" on page 48 Paper Jams " on page 48 " on page 48 " on page 48
" " " " Cannot Print Properly from the Digital Camera Cannot Print Properly from the Digital Camera" on page 49
Cannot Print Properly from the Digital Camera Cannot Print Properly from the Digital Camera
An Error Message is Displayed on the LCD
If Alarm Alarm Alarm Alarm lamp lights and an error message is displayed on the LCD, take the corresponding
countermeasure described below.
Message
NO PHOTOS ON CARD
LOAD PAPER
PAPER JAMMED
CHECK INK
U041
CHECK INK
U051
U052
U053
U059
CHECK INK
U075
U076
WASTE INK NEAR FULL
• Photo data edited/processed on the computer should be printed from the computer, not from the
camera.
• There is no proper data in the memory card. See "Memory Cards Supported by This Printer" on page 9.
Reload the paper correctly and press the OK
If paper has jammed in the printer, clear the jam, reload the paper in the printer correctly and then press
the OK OK OK OK button.
See "Paper Jams" on page 48.
Replace the FINE Cartridge, and close the front cover.
If lines are misaligned or the resulting output is not satisfactory, carry out the Print Head Alignment.
If printing is in progress and you want to continue printing, press the OK
continue under the ink out condition with the FINE cartridge installed. Replace the empty FINE cartridge
immediately after the printing. The resulting print quality is not satisfactory, if printing is continued under
the ink out condition.
Possible causes are as follows:
• The FINE Cartridge may not be installed properly.
• The FINE Cartridge may not be the compatible with this printer.
Install the appropriate FINE Cartridge. If lines are misaligned or the resulting output is not satisfactory,
carry out the Print Head Alignment.
Some FINE Cartridges are not installed in place.
Install the FINE Cartridges in the appropriate positions.
The printer has a built-in ink absorber to hold the ink used during print head cleaning, for example. This
error message indicates that the ink absorber is nearly full.
Press the OK OK button to cancel the error so you can continue printing.
OK OK
Before the ink absorber becomes completely full, contact the Customer Care Center. (You will need to
replace a particular part of the printer.)
Canon recommends that you call for service as soon as this error occurs. Once the ink absorber becomes
completely full, printing cannot be performed until the ink tank is replaced.
" on page 43 " on page 43 " on page 43
" on page 45
" on page 45 " on page 45
" on page 45 " on page 45 " on page 45
" on page 49
" on page 49 " on page 49
Try This
OK button.
OK OK
" on page 45 " on page 45 " on page 45
OK button. Then printing can
OK OK
" on
" on " on
43