Configure The Settings Relating To The Logs [Log] - Panasonic WV-NW502S Operating Instructions Manual

Configure the settings relating to the logs [Log]

Click the [Log] tab on the "Basic" page. ( pages 20 and 21: How to display/operate the setup menu)
The settings relating to the log list can be configured in this section.
I Alarm
Settings for the alarm log list can be performed.
[Save logs]
Select "On" or "Off" to determine whether to save the
alarm logs.
On: Alarm logs will be saved.
Off: Alarm logs will not be saved.
Default: On
[Name of the destination directory for downloaded
images]
Enter the name of the destination directory to which
images associated with the logs are to be downloaded.
For example, enter "C:\alarm" to designate the folder
"alarm" under drive C.
Available number of characters: 3 - 128 characters
Available characters: Alphanumeric characters, the
slash (/), the backslash (\), the colon (:) and the
underscore (_).
I Manual
Configure the settings relating to manual saving of the
log list.
Select "On" or "Off" and designate the destination folder
in the same manner as for "Alarm".
32
I FTP error
Perform the settings for the FTP error log list.
Select "On" or "Off" and designate the destination folder
in the same manner as for "Alarm".
Important:
• When "Name w/o time&date" is selected for "File
name" on the [FTP img. trans.] tab on the "Network"
page, FTP error log and associated images will not
be saved.
To save them, select "Name w/time&date". ( page
77)