Part Names Of Main Unit - Sharp LC-20SH6U Operation Manual

Part Names of Main Unit
Tilt the display by holding the upper
part while securely holding down
the stand with your other hand.
To change the vertical angle of the LCD
TV set, tilt the screen up to 2.5 degrees
forwards or 10 degrees backwards.
Please adjust the angle so that the LCD
TV set can be watched most comfortably.
• How to adjust the angle
VOLUME
2011111111111····················
I NOTE
>
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a
headphone mini-plug is connected into the headphone jack.
• Do not set the volume at a high level. Hearing experts advise
against extended listening at high volume levels.
Speaker
POWER SLEEP
o
0 0
Plug the headphone mini-plug into the headphone jack
located on the front of the LCD TV set.
Adjust the sound volume using VOL (+)/(-) on the remote
control.
On-screen display
CH (Channel)
(V)/(A)
VOL (Volume)
(-)/(+)
r
POWER SLEEP
0
l
Re:::::n:n:icat=·.··~··.·
. . . . / . . . · ./I·. . . . · · . · . . . .
1 _-··
~ ~ s ~ @ ~ · ~ - = - ~ ~ - = - ~ ~ - = - ~ ~ - J ~ ~ ~ ::~:::e:~:~::~~::~i;~n~~i:he
headphonej a ck
The POWER indicator lights up green The SLEEP TIMER indicator lights up red when the
when the power is on, and red when in the SLEEP TIMER is set to "ON".
standby mode (the indicator will not light
up when the main power is off).
Upper control panel
The examples used throughout this manual are based on the LC-20SH6U model.
I NOTE >
• INPUT, CH (V)/(A), VOL
(-)/(+)
and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
Household
power outlet
Cable TV Line
POWER
AC cord
Connect to the POWER INPUT terminal of the LCD TV set using the AC cord (supplied).
CABLE TV (CATV) CONNECTION
• A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable
to the set, screw the 75-ohm cable to the ANT. terminal.
• Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3
or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more
specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the
converter/descrambler provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
"A" position on the RF switch (not supplied): You can view all unscrambled channels by using the TV's channel keys.
"B" position on the RF switch (not supplied): You can view the scrambled channels via the converter/descrambler by
using the converter's channel keys.
[NOTE>
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch, or combiner that might be required.
I NOTE
>
• Unplug the AC cord from the power outlet when the LCD TV set is not to be used for a long period of time.