Table of Contents
Advertisement
Part Names of Main Unit
Controls
Upper control panel
Speaker
OPC sensor
Remote sensor
NOTE
• INPUT, CH (
)/(
), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
MAIN POWER
INPUT
MENU
CH ( ) / ( )
VOL ( ) / ( )
To change the vertical angle of the LCD TV
set, tilt the screen up to 5 degrees forward or
10 degrees backward. The LCD TV set can
also be rotated up to 25 degrees to right and
left. Please adjust the angle so that the LCD
TV set can be watched most comfortably.
Speaker
HEADPHONE jack
Plug the headphone mini-plug into the Headphone jack
located on the front of the LCD TV set. (See page 6.)
OPC indicator (Optical Picture Control)
The Optical Picture Control indicator lights up green when the
"Backlight" is set to "Auto (OPC)". (See page 23.)
POWER indicator
POWER indicator lights up green when the power is on, and
red when in the standby mode (the indicator will not light
when the main power is off). The indicator lights up orange
when the wake-up timer is set (the indicator will light when in
the standby mode).
How to adjust the angle
Tilt the display by grabbing onto
the carrying handle while securely
holding down the stand with your
other hand.
7
Advertisement
Table of Contents
