Table of Contents
Advertisement
Applications
The Model DS309 hub is designed to provide flexibility in configuring your network connections.
Each hub can be used as a standalone device or can be used with 10 Mbps or 100 Mbps hubs or
other interconnection devices in various configurations. The configuration examples in this
section illustrate the integration of the Model DS309 hub in various network environments using
other NETGEAR products.
10 Mbps or 100 Mbps Transmission with the Hub
Refer to the following illustration when connecting your Model DS309 hub. The illustration
shows a Model DS309 hub connecting users to a printer, servers, and a router.
Network
printer
ISDN
Model RT328
ISDN Router
Daisy Chaining Using Port 9
Port 9 is a switched half-duplex port that enables the Model DS309 hub to cascade to other 100
Mbps hubs, bypassing 100BASE-TX limitations. The following illustration shows how three
Model DS309 hubs can be cascaded to expand the network. Without the Switched port, a separate
switch unit, such as the Model FS308 switch, is needed to cascade the units together.
Model DS309 hubs
Model DS309 Dual Speed Hub Installation Guide
Model DS309 hub
100M
10M
On = Link Blinking = Activity
Switched
Normal/Uplink
8
7
6
5
4
3
2
1
9
PCs
PC
Power
server
user
100-240 VAC, 50-60Hz, 0.35A
100-240 VAC, 50-60Hz, 0.35A
Key
100-240 VAC, 50-60Hz, 0.35A
100-240 VAC, 50-60Hz, 0.35A
Key
10 Mbps
100 Mbps
Power
user
server
9008FA
10 Mbps
100 Mbps
9010FA
Advertisement
Table of Contents
