Belkin F8Z082-BLK - TuneTalk - Digital Player Voice Recording Unit User Manual page 5

Using the TuneTalk Stereo
Quick Memo Button
By pressing the "Quick Memo" button on the left side of the TuneTalk Stereo, the iPod will
automatically go to the "record" screen, no matter where you are in the iPod menu system, unless
a recording is already in progress. Simply select "Record" or press "Play/Pause" to begin recording.
Recording LED Indicator
The TuneTalk Stereo features an LED to help you make the best possible recordings. This LED
helps determine if the auto-gain switch is set correctly in conjunction with your microphone
and/or recording setting. The LED will be off when TuneTalk is connected to the iPod but not
recording. The LED will blink twice to verify connection and remain solid red to indicate that the
iPod is recording. The LED will rapidly flash red when the sound level exceeds TuneTalk's input
range (e.g., when you hear static, distortion, or the audio breaks up [i.e., there is audio clipping]).
It is advisable to perform a quick sound check and playback before making longer recordings to
ensure that you are using the most appropriate setting.
USB Power/Sync Cable
Connect the mini-B USB connector into the TuneTalk Stereo and the other end into any powered
USB port on your computer. iTunes will launch, allowing you to power and sync simultaneously.
You can also power and charge your iPod from a powered USB port on a PC or Mac® computer, or
through an AC Wall Charger for iPod (5V @ 500mA). Not all USB power cords are compatible.
NOTE: In order to power and charge, and continue to use the TuneTalk Stereo, you must first
eject the iPod from within iTunes. The iPod will then exit Extended Mode and return to normal
operation. The iPod should still display the charging icon in the top right-hand corner.
You may find that the battery indicator on your iPod shows that its battery drains very quickly
when you use your TuneTalk Stereo. The battery indicator tends to be very conservative when
the hard drive is under heavy load, as it is when you are using the device to record. Even if your
battery indicator is in the red, you'll often find that you have lots of recording time left before the
battery is completely drained.
Using the TuneTalk Stereo | 04