Part 6. Self-Test Is Not Normal - Epson U675 - TM Color Dot-matrix Printer Troubleshooting Manual

Self-test is not normal.
To initiate the self-test for the RECEIPT part of the printer, follow these instructions:
1. Make certain there is either a paper roll or a label roll inserted and loaded into the
printer before starting.
2. Turn off the printer using the power button.
3. Turn the printer on while keeping the FEED button depressed. The self-test
should now start and the information printed will give the status of the printer.
4. When the test print is complete, the following will be on the last line of print,
"Self-test printing, Please press FEED button." The PAPER OUT LED flashes to
indicate the standby condition.
5. Press the FEED button to continue the self-test or switch the printer off and then
back on again to resume normal printing.
To initiate the self-test for the SLIP part of the printer, follow these instructions:
1. Turn off the printer using the power button.
2. Turn the printer on while keeping the RELEASE button depressed. The SLIP
LED should now be flashing. Insert a piece of paper into the slip printing area
then printing will commence and the information printed will give the status of
the printer.
3. When printing is complete, the SLIP LED will be flashing. To continue the self-
test, insert more paper in the slip part of the printer or switch off and back on
again to resume normal printing.
Part 6.
The Self-Test.