Epson U375 - TM B/W Dot-matrix Printer User Manual page 32

Notes:
There may be some difference between the measured distance A
and the actual sensing position.
3. Find the corresponding adjustment position number from the table below.
Distance A
10 mm (0.39 inch)
8 mm (0.32 inch)
6 mm (0.24 inch)
4 mm (0.16 inch)
2 mm (0.08 inch)
4. Loosen the detector screw with a coin or screwdriver.
5. Set the detector scale to the position you determined from the table by
moving the detector screw up or down. The numbers #1, #2, #3... are
not marked on the detector scale. Use the illustration below for reference.
Detector scale
6. Secure the detector screw; then replace the take-up spool and close the
printer cover.
1-24 Setting Up the Printer
Adjustment position number
#l
#2
#3
#4
#5
Detector scale
Distance A