Epson U375 - TM B/W Dot-matrix Printer User Manual page 23

2
or 3 more times
Knob
4. Make sure that the ribbon is installed between the print head and the
ribbon mask without wrinkles or creases, as shown below.
Print head
Note:
If the ribbon is not installed correctly, to remove the ribbon cassette,
grasp the cassette's tab on the left side, lift the left side out first, and
then pull the cassette out of the printer. Repeat steps 2, 3 and 4
above to install the ribbon cassette again.
Tab
1 - 1 5
Setting Up the Printer