KVM Switch Control up to four PS/2 computers using one monitor, keyboard and mouse F1DJ102P-B User Manual F1DJ104P-B 11uk_F1DJ10x_man.indd 1 12/11/04 11:33:46...
OVERVIEW OVERVIEW Equipment Requirements The Belkin KVM Switch allows you to control multiple computers with one keyboard, monitor, and mouse. The Switch supports PS/2 input devices (keyboard and mouse), Cables VGA, SVGA, XGA, and PS/2 computers. For each PS/2 computer you plan to connect to the Switch, you will need one Feature Overview VGA cable, one PS/2 keyboard cable, and one PS/2 mouse cable.
For this reason, your PS/2 computer should be placed data, and/or to the Switch. Belkin Corporation will not be responsible for damage within 25 feet of the KVM Switch.
Page 7
INSTALLATION INSTALLATION 2. Take the video cable that is attached to your monitor and connect it to the Connecting the Computer: VGA OUT port located on the side of the Switch. 3. Using an OmniView KVM Cable kit, take the VGA cable and connect the male end of the cable to the VGA port on the first computer.
Page 8
INSTALLATION INSTALLATION 4. Connect one end of the PS/2 keyboard KVM cable to the keyboard port on 5. Connect one end of the PS/2 mouse KVM cable to the mouse port on your the computer and the other end to the KEYBOARD 1 port on the side of computer and the other end to the MOUSE 1 port on the side of the Switch.
USING YOUR SWITCH USING YOUR SWITCH Powering Up the Systems You can switch directly to any port by entering the Switch port number you wish to use. For example, if you press “SCROLL LOCK”, “SCROLL LOCK”, “2”, the Once all cables have been connected, power up your CPUs that are attached computer on port 2 will be selected.
PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet away using standard CAT5 UTP cable. A: Yes, the Switch works with Sun computers when used with the Belkin Sun Adapter, part number F1D082. P74711uk_F1DJ10x_man.indd 16-17...
Switch and computer, you will need to purchase cannot be drawn from the computer via the keyboard or through a USB port. the optional 9V DC, 600mA power adapter (Belkin part number F1D065-PWR for your appropriate country).
Page 12
TROUBLESHOOTING TROUBLESHOOTING Keyboard • Deactivate power management schemes on the PC with which you are experiencing problems. Computer does not detect your keyboard and you get a keyboard error reported at boot up. • Try swapping the mouse with a different one. The mouse is not detected at boot up.
• Make sure that the keyboard and mouse cables are connected tightly between the Switch and the computer. We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products: • Check that the keyboard and mouse cables are not crossed, i.e., make sure the connectors are plugged into the correct ports.
Page 14
Belkin Corporation warrants this product against defects in materials and workmanship for its warranty period. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.
Need help?
Do you have a question about the F1DJ104P-B and is the answer not in the manual?
Questions and answers