Setting The Interval Shooting - Pentax 17731 Operating Manual

Setting the Interval Shooting

In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
Interval
Number of
3
Shots
Start Delay
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Interval Shoot].
3
Press the four-way controller (5).
The [Interval Shoot] setting screen appears. [Interval] is marked with
the frame.
4
Set the interval.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to
set the minutes, then press the four-
way controller (5).
3 Use the four-way controller (23) to
set the seconds, then press the four-
way controller (5).
The setting is saved, and the frame returns to [Interval].
124
10 sec. – 99 min.
2 shots – number of
recordable images
0 min. – 24 hours
Set the camera to take pictures at intervals.
The intervals can be set in increments of one
second from ten seconds to four minutes, or in
one-minute increments from four to 99
minutes. You cannot set the camera to take
interval shots for less than ten seconds.
You can set this to up to 1000 shots. However, it
cannot exceed the number of recordable images.
You can set one minute increments for the first 59
minutes and one hour increments from there. If the
start time is set to 0 minutes, the first picture is taken
as soon as the shutter release button is pressed.
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
Exit
MENU
Interval Shoot
Interval 0min. 10sec.
Number of Shots 2
Start Delay 0hr.
MENU
0min.