Installing The Battery - Pentax 17731 Operating Manual

The time required to fully charge the battery is about 150 minutes (max.).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging
the battery is 0°C to 40°C (32°F to 104°F).
1

Installing the Battery

Use the rechargeable lithium-ion battery D-LI78 that is provided with the
camera. Charge the battery before using it in the camera for the first
time.
Battery/card/terminal
cover lock lever
1
Open the battery/card/terminal cover.
Press the battery/card/terminal cover lock lever in the direction shown
1, slide the cover towards 2 and open it towards 3.
2
Using the side of the battery to press the battery lock
lever in the direction of 4, insert the battery with the
PENTAX logo pointing toward the lens.
Push the battery in until it is locked in place.
Make sure that the battery is inserted with the PENTAX logo pointing
toward the lens. If the battery is incorrectly oriented, malfunction may
result.
34
Battery lock lever
Battery
Battery/card/
terminal cover