Connecting Components With Hdmi; Audio Return Channel Function - Onkyo HT-S7500 Instruction Manual

Connecting Components with HDMI

Personal computer
Game console
*
If your TV doesn't support Audio Return Channel (ARC), you
need to connect an optical digital cable together with the HDMI
cable to the AV receiver.
* When listening to an HDMI component through the AV
receiver, set the HDMI component so that its video can be seen
on the TV screen (on the TV, select the input of the HDMI
component connected to the AV receiver). If the TV power is off
or the TV is set to another input source, this may result in no
sound from the AV receiver or the sound may be cut off.
Satellite/cable set-top box, etc.
Connect your components to the appropriate jacks. The
default input assignments are shown below.
✔: Assignment can be changed
Jack Components
IN1 Blu-ray Disc/DVD player
IN2 Satellite/cable set-top box, etc.
IN3 Game console
IN4 Personal computer
IN5 Other components
IN6 Other components
IN7 Other components
OUT TV, projector, etc.
See also:
• "Connection Tips and Video Signal Path"
• "Using an RIHD-compatible TV, Player, or Recorder"
(➔ page 86)
• "About HDMI" (➔ page
Tip
• To listen to the audio of a component connected via HDMI
through your TV's speakers, enable "HDMI Through"
(➔ page 60) and set the AV receiver to standby mode.
TV, projector, etc.
Blu-ray Disc/DVD player
(➔ page 48).
✔
✔
✔
✔
✔
✔
✔
(➔ page 83)
88)
En-15
Note
• In the case of Blu-ray Disc/DVD players, if no sound is output
despite following the above-mentioned procedure, set your Blu-
ray Disc/DVD player's HDMI audio settings to PCM.
■
Audio Return Channel (ARC) function
The Audio Return Channel (ARC) function enables an
HDMI capable TV to send the audio stream to HDMI OUT
on the AV receiver.
• This function can be used when:
– Your TV is ARC capable, and
– The TV/CD input selector is selected, and
– "HDMI Control(RIHD)" is set to "On"(➔ page
– "Audio Return Channel" is set to "Auto"
Connections
60), and
(➔ page 61).