Onkyo HT-S7500 Instruction Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Receiver
  5. HT-S7500
  6. Instruction manual

Onkyo HT-S7500 Instruction Manual

Owner manual
Hide thumbs Also See for HT-S7500:
Table of Contents

Advertisement

Quick Links

Enlarged version
AV RECEIVER
HT-R791
Instruction Manual
Contents

Table of Contents ...........................................5

Connections .................................................11
Turning On & Basic Operations..................19
Advanced Operations ..................................43
Controlling Other Components...................66
Appendix .......................................................73
Speaker Package
Internet Radio Guide
Remote Control Codes
E
n

Advertisement

Table of Contents
loading

Related Manuals for Onkyo HT-S7500

Summary of Contents for Onkyo HT-S7500

  • Page 1: Table Of Contents

    Contents AV RECEIVER Safety Information and Introduction ....2 HT-R791 Table of Contents ...........5 Connections ..........11 Turning On & Basic Operations....19 Instruction Manual Advanced Operations ........43 Controlling Other Components....66 Appendix ............73 Speaker Package Internet Radio Guide Remote Control Codes...

  • Page 2: Safety Information And Introduction

    Safety Information and Introduction 9. Do not defeat the safety purpose of the polarized or D. If the apparatus does not operate normally by grounding-type plug. A polarized plug has two blades following the operating instructions. Adjust only WARNING: with one wider than the other. A grounding type plug those controls that are covered by the operating TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, has two blades and a third grounding prong.

  • Page 3: Precautions

    If water or any other liquid gets inside water. Dry the unit immediately afterwards with a • Increase the separation between the equipment and this unit, have it checked by your Onkyo dealer. clean cloth. Don’t use abrasive cloths, thinners, receiver.

  • Page 4: Supplied Accessories

    Approx. 16 ft. (5 m) same regardless of color. ■ Installing the batteries Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.

  • Page 5: Table Of Contents

    Front & Rear Panels............7 Remote Control Codes Listening to AM/FM Radio ........30 Front Panel..............7 for Onkyo Components Connected via RI ..... 70 Using Basic Functions..........32 Display ................8 Resetting the REMOTE MODE Buttons ....70 Using the Automatic Speaker Setup......32 Rear Panel ..............9...

  • Page 6: Connections

    Safety Information and Introduction Features Connections • 7 HDMI Inputs and 1 Output Amplifier • Onkyo for System Control • 4 Digital Inputs (2 Optical/2 Coaxial) • 80 Watts/Channel @ 8 ohms (FTC) • Component Video Switching (1 Input/1 Output) •...

  • Page 7: Front & Rear Panels

    Safety Information and Introduction Front & Rear Panels Front Panel For detailed information, see the pages in parentheses. RETURN button ON/STANDBY button (19) MASTER VOLUME control (22) ZONE 2, OFF buttons (65) MUSIC OPTIMIZER button and indicator (42, 45) Remote control sensor (4) PHONES jack (42) Display (8) TONE and Tone Level buttons (44)

  • Page 8: Display

    Safety Information and Introduction Display For detailed information, see the pages in parentheses. Input indicators (84) Z2 (Zone 2) indicator (65) HDMI indicator (60) 3D indicator DIGITAL indicator This lights when a 3D input signal is detected. ARC indicator (61) Headphone indicator (42) USB indicator (24, 25) and cursor indicators (24)

  • Page 9: Rear Panel

    Safety Information and Introduction Rear Panel DIGITAL IN COAXIAL and OPTICAL jacks Composite video and analog audio jacks (BD/DVD IN, CBL/SAT IN, GAME IN, PC IN, COMPONENT VIDEO IN and OUT jacks TV/CD IN) ETHERNET port ZONE 2 LINE OUT jacks FM ANTENNA jack and AM ANTENNA terminal SUBWOOFER PRE OUT jacks HDMI IN and HDMI OUT jacks...

  • Page 10: Remote Controller

    To control the AV receiver, press RECEIVER to select Receiver mode. You can also use the remote controller to control Controlling the AV Receiver Onkyo Blu-ray Disc/DVD player, CD player, and other components. See “Entering Remote Control Codes” for more details (➔...

  • Page 11: Connections

    Connections Connecting the AV Surround Surround Receiver right left Connecting Your Speakers Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass.
  • Page 12 Connections Connecting the Speaker Cables • Don’t connect more than one cable to each speaker terminal. Doing so may damage the AV receiver. The speaker terminals are color-coded for identification • Don’t connect one speaker to several terminals. purpose. Speaker Color Front left, Zone 2 left White...
  • Page 13 Connections Using Powered Subwoofers LINE INPUT LINE INPUT LINE INPUT LINE INPUT Powered subwoofer Corner position 1/3 of wall position To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room, and choose the one that provides the most satisfying results.

  • Page 14: About Av Connections

    Connections ■ AV Cables and Jacks Analog audio (RCA) About AV Connections Analog audio connections (RCA) carry analog audio. ■ HDMI Connecting AV components White HDMI connections can carry digital video and audio. HDMI cable : Video & Audio TV, projector, etc. For PCM signals, the supported sampling rates are ■...

  • Page 15: Connecting Components With Hdmi

    Connections Connecting Components with HDMI Satellite/cable set-top box, etc. Personal computer TV, projector, etc. Blu-ray Disc/DVD player Game console Connect your components to the appropriate jacks. The If your TV doesn’t support Audio Return Channel (ARC), you Note need to connect an optical digital cable together with the HDMI default input assignments are shown below.

  • Page 16: Connecting Your Components

    Connections Connecting Your Components Note The on-screen menus appear only on a TV that is connected to HDMI OUT. If your TV is connected to When the USB input is selected, you can input video signals other video outputs, use the AV receiver’s display from the AUX INPUT VIDEO jack.

  • Page 17: Connecting Onkyo Ri Components

    Connections Connecting Onkyo RI Components Make sure that each Onkyo component is connected with an analog audio cable (connection in the hookup examples) (➔ page 16). Make the connection (see the illustration). If you’re using an RI Dock, or cassette tape deck, change the Input Display (➔...

  • Page 18: Connecting The Antennas

    Connections Connecting the Antennas Connecting the Power Cord This section explains how to connect the supplied indoor FM antenna and AM loop antenna. Plug the power cord into an AC wall outlet. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.

  • Page 19: Turning On & Basic Operations

    Turning On & Basic Operations Turning On/Off the AV ■ Turning On Smooth Operation in a Few Easy Steps (Initial Setup) Receiver ON/STANDBY on the front panel. Press To ensure smooth operation, here’s a few easy steps to help you configure the AV receiver before you use it for the very first time.

  • Page 20: Turning On & Basic Operations

    Turning On & Basic Operations Initial Setup Selecting the Language for the Audyssey 2EQ: Auto Setup Onscreen Setup Menus This section explains the settings that we recommend you This step performs the automatic speaker setup. to make before using the AV receiver for the very first This step determines the language used for the onscreen time.

  • Page 21: Source Connection

    Turning On & Basic Operations Source Connection Remote Mode Setup Network Connection This step checks the connection of source components. With this step, you can enter remote control codes for the This step checks your network connection. components you want to operate. Use / to select one of the following options, and Use / to select one of the following options, and then press ENTER.

  • Page 22: Playback

    • “Remote Playback” (➔ page • “Listening to AM/FM Radio” (➔ page • The time until the screen saver activates itself can be changed • “iPod/iPhone Playback via Onkyo Dock” (➔ page 59). in the “Screen Saver” setting (➔ page •...

  • Page 23: Controlling Contents Of Usb Or Network Devices

    Turning On & Basic Operations TOP MENU Controlling Contents of USB or This button displays the top menu for each media or service. This button stops playback. Network Devices / and ENTER MODE These buttons navigate through the menus. You can switch between Standard Mode and Extended Mode Press USB or NET first.

  • Page 24: Understanding Icons On The Display

    Turning On & Basic Operations Press MODE repeatedly to switch to Extended Understanding Icons on the Display Playing an iPod/iPhone via USB Mode (Music) or Extended Mode (Video). This section describes icons that appear on the AV A list of your iPod/iPhone model’s contents appears. The on-screen menus appear only on a TV that is receiver’s display during media playback.

  • Page 25: Playing A Usb Device

    Turning On & Basic Operations Extended Mode (Music) Control Playing a USB Device The music content information is displayed (lists are displayed), and you can control the music content while The on-screen menus appear only on a TV that is looking at the screen.

  • Page 26: Listening To Vtuner Internet Radio

    To register your favorite stations using a personal computer, you need to connect your PC to the same network as the AV receiver. Enter the ID# (MAC address) of your unit on the http://onkyo.vtuner.com/. You can then register your favorite radio programs. The My Music 0 : 11 ID# is shown at the bottom of the “vTuner Internet...

  • Page 27: Registering Other Internet Radio

    Turning On & Basic Operations Click “Save” to save the Internet radio station. Registering Other Internet Radio Changing the Icon Layout on the The Internet radio station is then added to “My Network Service Screen Favorites”. To play the registered station, press NET, You need to connect the AV receiver to your home and then select “My Favorites”...

  • Page 28: Playing Music Files On A Server

    Turning On & Basic Operations Windows Media Player 11 Setup Playing Music Files on a Server Use / to select an item, and then press ENTER or to start playback. This section explains how to configure Windows Media Player 11 so that the AV receiver can play the music files You need to connect the AV receiver to your home stored on your computer.

  • Page 29: Remote Playback

    Turning On & Basic Operations Click “OK” to close the dialog box. Adjusting the Volume. Remote Playback This completes the Windows Media Player 12 You can adjust the volume by adjusting the volume configuration. bar in the “Remote playback” window. The default You need to connect the AV receiver to your home maximum volume level is 64.

  • Page 30: Listening To Am/Fm Radio

    Turning On & Basic Operations ■ Tuning into Radio Stations Manual tuning mode Listening to AM/FM Radio In manual tuning mode, FM stations will be in mono. ■ Auto tuning mode This section describes the procedure of using the Press TUNING MODE so that the AUTO indicator buttons on the front panel, unless otherwise specified.
  • Page 31 Turning On & Basic Operations ■ Presetting AM/FM Stations Deleting Presets You can store a combination of up to 40 of your favorite Select the preset that you want to delete. AM/FM radio stations as presets. See the previous section. While holding down MEMORY, press TUNING Tune into the AM/FM station that you want to store MODE.

  • Page 32: Using Basic Functions

    Turning On & Basic Operations Using Basic Functions Measurement procedure Note • Make the room as quiet as possible. Background noise and Radio To create a listening environment in your home theater that Frequency Interference (RFI) can disrupt the room all listeners will enjoy, Audyssey 2EQ takes measurements Using the Automatic Speaker Setup measurements.
  • Page 33 Turning On & Basic Operations Turn on the AV receiver and the connected TV. Use / to select an option, and then press ENTER. Use / to select “Audyssey Quick Start” or On the TV, select the input to which the AV receiver “Audyssey 2EQ Full Calibration”, and then press 2EQ: Auto Setup is connected.
  • Page 34 • Writing Error! This message appears if saving fails. Try saving again. If this message appears after 2 or 3 attempts, contact your Onkyo dealer. • Speaker Detect Error This message appears if a speaker is not detected. “No” means that no speaker was detected.

  • Page 35: Using The Listening Modes

    Turning On & Basic Operations Using the Listening Modes Selecting Listening Modes See “About Listening Modes” for detailed information (➔ page 36). about the listening modes ■ Listening Mode Buttons Press RECEIVER first. MOVIE/TV, MUSIC, GAME MOVIE/TV button This button selects the listening modes intended for use with movies and TV.
  • Page 36 Turning On & Basic Operations About Listening Modes Input Source Speaker Layout The following audio formats are supported by the listening The illustration shows which speakers are activated in each The AV receiver’s listening modes can transform your modes. channel. See “Speaker Configuration” for the speaker listening room into a movie theater or concert hall, with setup (➔...
  • Page 37 Turning On & Basic Operations ■ Onkyo-Original DSP Listening Modes Listening Mode Description Input Speaker Source Layout Listening Mode Description Input Speaker T-D (Theater- With this mode you can enjoy a virtual Source Layout Dimensional) surround sound even with only two or three...
  • Page 38 Turning On & Basic Operations ■ Listening Modes Listening Mode Description Input Speaker Source Layout Listening Mode Description Input Speaker In this mode, audio from the input source is Source Layout output without surround-sound processing. Direct In this mode, audio from the input source is D T S The speaker configuration (presence of output without surround-sound processing.
  • Page 39 Turning On & Basic Operations Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout Dolby Pro Logic IIx Dolby Pro Logic IIx expands any 2-channel DTS Neo:6 This mode expands any 2-channel source for Dolby Pro Logic II source for 7.1-channel playback.

  • Page 40: Using The Home Menu

    Turning On & Basic Operations ENTER again switches to that selection. If you want Using the Home Menu to play music files on a server, use / / / • If no video signals are present, the thumbnails will be filled in select “DLNA”...

  • Page 41: Using The Sleep Timer

    With the sleep timer, you can set the AV receiver to turn You can display various information about the current When you connect an -capable Onkyo component, you off automatically after a specified period. input source as follows. must configure the input display so that can work properly.

  • Page 42: Using The Music Optimizer

    Turning On & Basic Operations Using the Music Optimizer Using Headphones The Music Optimizer function enhances the sound quality Connect a pair of stereo headphones with a of compressed music files. standard plug (1/4 inch or 6.3 mm) to the PHONES jack.

  • Page 43: Advanced Operations

    Advanced Operations ■ On-screen Setup Input Using the Quick Setup You can select input sources and view the following information: the name of input selectors, input With the AV receiver connected to a TV, there are two assignments, radio information, and ARC function ways of changing the settings on-screen: using the Quick setting.

  • Page 44: Using The Audio Settings Of Quick Setup

    Advanced Operations Speaker Levels Using the Audio Settings of Quick Note Setup • The video preview is not displayed when: ■ Subwoofer Level – HDMI IN 6/7 is the current HDMI input source, or –15dB to 0dB to +12dB in 1 dB steps You can change various audio settings from the Quick –...
  • Page 45 Advanced Operations Late Night Music Optimizer CinemaFILTER ■ ■ ■ Late Night Music Optimizer Cinema Filter For Dolby Digital and Dolby Digital Plus sources, the options are: The Music Optimizer function enhances the sound quality Turn this setting on to soften overly bright movie Low: soundtracks, which are typically mixed for reproduction in of compressed music files.

  • Page 46: Using The Setup Menu (Home)

    Advanced Operations Explanatory Notes ■ Using the Setup Menu (HOME) Screen Saver If there is no video signal on the current input source and Main Menu Speaker Setup no operation for a specific time (three minutes by Remote default), a screen saver automatically comes on. Speaker Configuration indicator ■...

  • Page 47: About The Hybrid Standby Indicator

    Advanced Operations Main menu item Sub menu item About the HYBRID STANDBY indicator Setup menu items Hardware Setup Tuner By way of optimized circuitry, this function reduces power (➔ page HDMI Main menu item Sub menu item consumption when the AV receiver is in standby mode. Auto Standby Input/Output Assign Monitor Out...

  • Page 48: Input/Output Assign

    Advanced Operations ■ HDMI Input BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD, Input/Output Assign EXTRA1, EXTRA2 If you connect a video component to an HDMI input, you HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, must assign that input to an input selector. For example, if HDMI6, HDMI7: “Setup”...
  • Page 49 Advanced Operations Component Video Input Digital Audio Input If you connect a video component to a component video If you connect a component to a digital audio input, you input, you must assign that input to an input selector. For must assign that input to an input selector.

  • Page 50: Speaker Setup

    Advanced Operations Speaker Configuration Speaker Setup Note “Full Band” can be selected only when “Full Band” is selected in the “Front” setting. This setting is set automatically by Audyssey 2EQ Room “Setup” If the “Surround” setting is set to “None”, this setting cannot Correction and Speaker Setup (➔...
  • Page 51 Advanced Operations ■ Double Bass Speaker Distance Level Calibration This setting is NOT set automatically by This setting is set automatically by Audyssey 2EQ Room This setting is set automatically by Audyssey 2EQ Room ® Audyssey 2EQ Room Correction and Speaker Setup Correction and Speaker Setup (➔...

  • Page 52: Audio Adjust

    Advanced Operations ■ Dolby PL IIz Height Gain Audio Adjust ■ PL IIx Music (2ch Input) “Setup” These settings apply to only 2-channel stereo sources. High If you’re not using any surround back speakers, these The Height Gain Control in Dolby Pro Logic IIz enables settings apply to Dolby Pro Logic II, not Dolby Pro Logic the listener to select how much gain is applied to the front Main Menu...

  • Page 53: Source Setup

    Advanced Operations ■ TrueHD Loudness Management Theater-Dimensional Source Setup ■ Listening Angle “Setup” This setting specifies whether or not to apply the Late Wide: Night processing on a Dolby TrueHD source. Select if the listening angle is greater than 30 degrees. Items can be set individually for each input selector.
  • Page 54 Advanced Operations ■ Dynamic EQ Audyssey Dynamic EQ is referenced to the standard film About Audyssey Dynamic EQ ® mix level. It makes adjustments to maintain the reference Audyssey Dynamic EQ solves the problem of response and surround envelopment when the volume is deteriorating sound quality as volume is decreased by turned down from 0 dB.
  • Page 55 Advanced Operations IntelliVolume Name Edit Space: Enters a space character. You can enter a custom name for each individual input ■ IntelliVolume Shift selector and radio preset for easy identification. When –12dB to 0dB to +12dB in 1 dB steps. entered, the custom name will appear on the display.
  • Page 56 Advanced Operations ■ ■ Picture Adjust Picture Mode Game Mode *2*3*4 Custom: Using Picture Adjust, you can adjust the picture quality All settings can be performed manually. and reduce any noise appearing on the screen. Cinema: If video signal delay occurs during playback on a video To view the TV picture while setting, press ENTER.
  • Page 57 Advanced Operations ■ Brightness Audio Selector Setting the Incoming Digital Signal (Fixed *1*2*4 Mode) –50 to 0 to +50 ■ With this setting, you can adjust the picture brightness. Audio Selector ■ “–50” is the darkest. “+50” is the brightest. Fixed Mode ARC: The audio signal from your TV tuner can be sent to...

  • Page 58: Listening Mode Preset

    Advanced Operations ■ DTS/DTS-ES/DTS-HD Listening Mode Preset Use / to select the signal format that you want to With this setting, you can specify the listening mode set, and then use to select a listening mode. used when DTS or DTS-HD High Resolution format Only listening modes that can be used with each input digital audio signals are played (DVD, LD, CD, etc.).

  • Page 59: Miscellaneous

    Advanced Operations OSD Setup Miscellaneous Hardware Setup ■ On Screen Display “Setup” “Setup” This preference determines whether operation details are Main Menu Miscellaneous Main Menu Hardware Setup displayed on-screen when an AV receiver function is Tuner adjusted. Volume Setup Even when “On” is selected, operation details may not be ■...
  • Page 60 Advanced Operations ■ ■ HDMI HDMI Through Audio TV Out ■ HDMI Control(RIHD) BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD, EXTRA1, EXTRA2: This preference determines whether the incoming audio Selects the input source for which the HDMI signal is output from the HDMI output. You may want to Through function is enabled.
  • Page 61 Advanced Operations ■ ■ Audio Return Channel (ARC) LipSync Auto Standby ■ Auto: Auto Standby The audio signal from your TV tuner can be sent to This function allows the AV receiver to automatically HDMI OUT of the AV receiver. correct any delay between the video and the audio, based The audio return channel (ARC) function allows an ARC on the data from the connected monitor.
  • Page 62 Advanced Operations ■ Network Network Standby Note • If you select “Disable”, you must configure the “IP Address”, “Subnet Mask”, “Gateway”, and “DNS Server” settings After modifying the network settings, you must confirm This setting enables or disables control over the network. yourself.

  • Page 63: Remote Controller Setup

    ■ Setup 1, 2, or 3 Locked When several Onkyo components are used in the same Unlocked room, their remote ID codes may overlap. To differentiate When “Locked” is selected, the setup menus will be the AV receiver from other components, you can change locked and you cannot change any setting.

  • Page 64: Zone 2

    Advanced Operations Zone 2 Connecting the Zone Speakers to an Main room Additional Amplifier In addition to the main listening room, you can also enjoy This setup allows 7.1-channel playback in your main playback in another room, or as we call Zone 2. And, you listening room and 2-channel stereo playback in Zone 2.

  • Page 65: Controlling Zone 2 Components

    Advanced Operations Muting Zone 2 Controlling Zone 2 Components Press ZONE2, then point the remote controller at ■ ■ the AV receiver and press RECEIVER. Operating on the AV receiver Operating on the remote controller Zone 2 turns on, the Z2 indicator lights on the AV Input selector buttons Press ZONE2 followed by MUTING.

  • Page 66: Controlling Other Components

    You can even depending on the region. Dock. use the AV receiver’s remote controller to operate your For the latest information on the Onkyo Dock iPod Alarm iPod/iPhone. components, see the Onkyo web site at: If you use the Alarm function on your iPod to start http://www.onkyo.com...

  • Page 67: Controlling Your Ipod/Iphone

    ). In this case, make an connection and DS-A2 RI Dock. enter the remote control code 81993 (with This button does not turn the Onkyo DS-A2 or DS-A2X RI ■ Dock on or off. Also, your iPod/iPhone may not respond the With the RI Control...

  • Page 68: Controlling Other Components

    For details on controlling these components, see the Use / to select a remote mode, and then press indicated pages. ENTER. The menu of category selection appears. BD/DVD Onkyo Blu-ray Disc player (➔ page Use / to select a category, and then press TV/CD Onkyo CD player (➔...

  • Page 69: Entering Remote Control Codes

    Controlling Other Components Entering Remote Control Codes Remapping Colored Buttons You’ll need to enter a code for each component that you You can change the configuration of colored buttons, with which REMOTE MODE buttons are preset. want to control. Look up the appropriate remote control code in the While holding down the REMOTE MODE button separate Remote Control Codes list.

  • Page 70: Remote Control Codes For Onkyo Components Connected Via Ri

    Controlling Apple TV Controlling Onkyo components without While holding down RECEIVER, press and hold If you want to control an Onkyo component by pointing the By programming the supplied remote controller with the down HOME until the remote indicator lights...
  • Page 71 Controlling Other Components ■ Controlling a Blu-ray Disc/DVD Player, HD TV operation Press the appropriate REMOTE DVD Player or DVD Recorder Available buttons MODE button first. Number: 1 to 9, 0 , INPUT, TV VOL / , BD/DVD is preprogrammed with the remote control code MUTING Number: +10 for controlling a component that supports the...
  • Page 72 Controlling Other Components ■ ■ DVD player / DVD recorder operation Satellite receiver / Cable receiver operation Press the appropriate REMOTE Available buttons Available buttons MODE button first. TOP MENU GUIDE Number: 1 to 9, 0 SOURCE Number: +10 DISPLAY / / / / / / ENTER...

  • Page 73: Appendix

    If you can’t resolve the issue yourself, try resetting the ■ Make sure that the inputs and outputs of all 15-17 AV receiver before contacting your Onkyo dealer. Can’t turn on the AV receiver components are connected properly. To reset the AV receiver to its factory defaults, turn it Make sure that the power cord is properly plugged —...
  • Page 74 Appendix If the input signal format is set to “PCM” or “DTS”. When Powered Zone 2 is used, playback in the main An audio cable may be picking up interference. Try — Set it to “Off”. room is reduced to 5.1channels and the front high and repositioning your cables.
  • Page 75 Move the AV receiver away from your TV or — If the video source is connected to a composite video If it’s an Onkyo component, make sure that the computer. input, your TV must be connected to the HDMI OUT cable and analog audio cable are connected properly.
  • Page 76 Appendix ■ The AV receiver unexpectedly selects my If you download or copy large files on your — RI Dock for iPod/iPhone iPod/iPhone as the input source computer, playback may be interrupted. Try closing ■ any unused programs, use a more powerful computer, There’s no sound Always pause iPod/iPhone playback before selecting —...
  • Page 77 When a pair of headphones is connected, the listening — You must use the buttons on the unit to make these Onkyo is not responsible for damages (such as CD rental mode is set to Stereo, unless it’s already set to Stereo, settings.
  • Page 78 Appendix Important Note Regarding Video Playback The AV receiver can upconvert component video and composite video sources for display on a TV connected to the HDMI OUT. However, if the picture quality of the source is poor, upconversion may make the picture worse or disappear altogether.

  • Page 79: Firmware Update

    Onkyo recommends that you back up your important music files beforehand. • If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC adapter to power it. • USB hubs and USB devices with hub functions are not supported.
  • Page 80 Contact your ISP. turn on again. Others Retry the update procedure from the beginning. Congratulations! You now have the latest firmware If the error persists, please contact Onkyo installed on your Onkyo AV receiver. (➔ page 82) and provide the error Support code.
  • Page 81 USB device, remove it first. this occurs, you can still view the update progress on Note Download the firmware file from the Onkyo web the AV receiver’s display. The on-screen display will • Never unplug or turn off the AV receiver during the update site.
  • Page 82 AC power cord and try again. Please contact an Onkyo distributor referring to Onkyo SUPPORT site. http://www.intl.onkyo.com/support/firmware/index.html The above-mentioned information is subject to change without prior notice. Visit the Onkyo web site for the latest update. En-82...

  • Page 83: Connection Tips And Video Signal Path

    Appendix ■ Connection Tips and Signal Selection Video Connection Formats If signals are present at more than one input, the inputs will Video Signal Path Video components can be connected by using any one of be selected automatically in the following order of priority: the following video connection formats: composite video, HDMI, component video, composite video.
  • Page 84 Appendix Audio Connection Formats Audio components can be connected by using any of the following audio connection formats: analog, optical, coaxial, or HDMI. When choosing a connection format, bear in mind that the AV receiver does not convert digital input signals for analog line outputs and vice versa.
  • Page 85 Appendix Video Resolution Chart The following tables show how video signals at different resolutions are output by the AV receiver. NTSC ✔: Output available Output HDMI Component Composite Input 1080p/24 1080p 1080i 720p 480p 480i 1080p 1080i 720p 480p 480i 480i ✔...

  • Page 86: Using An Rihd-Compatible Tv, Player, Or Recorder

    HDMI, is the name of the system control function found on • The AV receiver will enter standby mode when the TV is • Sharp TV set to standby. Onkyo components. The AV receiver can be used with ■ CEC (Consumer Electronics Control), which allows Players/Recorders •...
  • Page 87 Appendix ■ How to connect and setup Change each item in the “HDMI” menu according Operate with the remote controller. to the following settings: (➔ page 71). For buttons that can be operated Confirm the connection and settings. • HDMI Control(RIHD): On Note 1.

  • Page 88: About Hdmi

    Appendix About HDMI Supported Audio Formats About Copyright Protection • 2-channel linear PCM (32–192 kHz, 16/20/24 bit) The AV receiver supports HDCP (High-bandwidth Digital Designed to meet the increased demands of digital TV, Content Protection) , a copy-protection system for digital HDMI (High Definition Multimedia Interface) is a new •...

  • Page 89: Network/Usb Features

    Appendix Network/USB Features Consult your ISP if you have any problems with your Internet Network Requirements connection. • The AV receiver uses DHCP to configure its network settings ■ Ethernet Network automatically. If you want to configure these settings manually, Connecting to the Network For the best results, a 100Base-TX switched Ethernet see “Network”...
  • Page 90 • Protected WMA music files on an MP3 player cannot be played. Web browser: Microsoft Internet Explorer 6 or • Onkyo accepts no responsibility whatsoever for the loss or Netscape 7.1 damage to data stored on a USB device when that device is used ■...
  • Page 91 Appendix ■ WAV (.wav or .WAV) Supported Audio File Formats About DLNA WAV files contain uncompressed PCM digital audio. For server playback and playback from a USB device, the The Digital Living Network Alliance is an international, • Sampling rates of 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, AV receiver supports the following music file formats.

  • Page 92: License And Trademark Information

    Pro Logic and the double-D symbol are trademarks of Dolby other countries. Laboratories. Music Optimizer™ is a trademark of Onkyo Corporation. Manufactured under license from Audyssey Laboratories™, Inc. “HDMI, the HDMI Logo, and High-Definition Multimedia U.S. and foreign patents pending. Audyssey 2EQ ®...

  • Page 93: Specifications

    Appendix ■ Specifications Video Section Video Outputs Component Input Sensitivity/Output Level and Impedance Amplifier Section Composite MONITOR OUT 1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component P ■ Audio Inputs 1 Vp-p/75 Ω (Composite) Rated Output Power Component Video Frequency Response All channels: 80 watts minimum continuous power per Digital...
  • Page 94 Appendix Memo En-94...
  • Page 95 Appendix Memo En-95...
  • Page 96 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.cn.onkyo.com/ Y1203-1 SN 29401099EN (C) Copyright 2012 Onkyo Sound & Vision Corporation Japan. All rights reserved. * 2 9 4 0 1 0 9 9 E N *...
  • Page 97 HTP-791 7.1ch Home Theater Speaker Package Surround speakers (SKR-780) Keyhole slots Speaker terminals Supplied Accessories Surround back speakers (SKB-780) Make sure you have the following accessories. SKC-791 Front speakers (SKF-791) Keyhole slot (Blue) (Gray) Surround speakers Speaker terminals (Brown) (Tan) (White) (Red) SKR-780/SKB-780...
  • Page 98 • Be sure to tighten the screws when you attach the speaker Setting the Subwoofer Level Note bases. • The Auto Standby function turns the subwoofer on when the To set the level of the subwoofer, use the • Attach the speaker bases on a flat, level, and stable floor. input signal exceeds a certain level.

  • Page 99: Enjoying Home Theater

    • Be careful not to short the positive and negative wires. Surround back left and right speakers (SKB-780) Caution Doing so may damage your amp. These speakers further enhance the realism of surround • A mounting screw’s ability to support a Wall sound and improve sound localization behind the Note...
  • Page 100 ■ Center Speaker (SKC-791) Specifications Note Type 2 Way Bass-reflex For non-magnetic shielded speakers: ■ 6 Ω Powered Subwoofer (SKW-791) Impedance Try moving the speakers away from your TV or monitor. If Maximum input power 130 W Type Bass-reflex discoloration should occur, turn off your TV or monitor, Sensitivity 79 dB/W/m Input sensitivity/Impedance...

  • Page 101: Accessoires Fournis

    HTP-791 Ensemble d’enceintes du Home cinéma 7.1 can. Enceintes surround (SKR-780) Encoches en trou de serrure Bornes d’enceinte Accessoires fournis Enceintes surround arrière (SKB-780) Assurez-vous que le carton contient bien les accessoires SKC-791 suivants. Enceintes avant (SKF-791) Encoche en trou de serrure (Bleu) (Gris) Enceintes surround...
  • Page 102 • Assurez-vous de serrer les vis lorsque vous fixez les bases Réglage du niveau sonore du subwoofer Remarque d’enceintes. • La fonction de mise en veille automatique allume le subwoofer Pour régler le niveau sonore du subwoofer, utilisez • Fixez les bases d’enceintes sur un sol plat, égal et stable. lorsque le signal d’entrée dépasse un certain niveau.

  • Page 103: Branchement Des Enceintes

    • Veillez à ne pas mettre ne pas mettre les fils positifs et Enceintes surround arrière gauche et Mise en garde négatifs en court-circuit. Vous risqueriez d’endommager droite (SKB-780) • La capacité de la vis de fixation votre amplificateur. Ces enceintes renforcent encore plus le réalisme du son permettant de supporter une enceinte surround et améliorent la localisation du son derrière Remarque...
  • Page 104 À ressort et à code couleur Autre Protection non-magnétique Grille Fixe Autre Protection non-magnétique Y1203-1 SN 29400975-SP (C) Copyright 2012 Onkyo Sound & Vision Corporation Japan. All rights reserved. * 2 9 4 0 0 9 7 5 - S P *...
  • Page 105 Using Internet Radio Using Internet Radio Using Multiple Accounts Pandora ® internet radio –Getting Started (U.S. only) ..........2 The AV receiver supports multiple user accounts, which means you can freely switch between several logins. Common Procedures in Internet Radio After registering user accounts, login is performed from Menu the “Users”...

  • Page 106: Pandora ® Internet Radio -Getting Started (U.s. Only)

    If you are tired of a song, you can put the song to sleep Onkyo receiver and press enter to begin listening to and Pandora will not play it for one month.

  • Page 107: Using Rhapsody (U.s. Only)

    You can play tracks from Genres, Top Artists, Top have one yet, you can create a new account at Albums, Top Tracks, New Releases, and Staff Picks. Enabled buttons: www.rhapsody.com/onkyo Rhapsody Channels: RANDOM, REPEAT If you have an existing Rhapsody account, select Listen to radio channels programmed by Rhapsody’s...

  • Page 108: Using The Siriusxm Internet Radio (North American Only)

    “Sign In”. Enter your user name and SiriusXM Internet Radio subscriptions are sold separately Your Onkyo AV receiver includes a free trial of SiriusXM password in the next keyboard screen, or in Web and are governed by the Sirius Terms and Conditions (see Internet Radio.

  • Page 109: Using Last.fm Internet Radio

    Last.fm is a music service that learns what you love... Tracks”, “Library” and “Neighbours”. If you have the existing Last.fm account, you can sign Your new Onkyo AV receiver is very clever. If you have a Account Info: in to your account to select “Sign in to your free Last.fm account, it will keep track of all the songs...

  • Page 110: Using Slacker Personal Radio

    Using Internet Radio You can control the tracks with the buttons on the Using Slacker Personal Radio remote control. If you do not have an account, create one on the Enabled buttons: Slacker website (www.slacker.com) with your ■ Menu Items computer.

  • Page 111: Using Mp3Tunes

    Using Internet Radio Playing Contents on the AV Receiver Using MP3tunes Use / to select a track and press ENTER or to start playback. Listen to your music collection on your home stereo in A playback screen appears. complete digital fidelity without a personal computer plus •...
  • Page 112 Utilisation d’une webradio Utilisation d’une Utilisation de plusieurs comptes Pandora ® internet Radio –Pour commencer webradio (États-Unis uniquement)......2 L’ampli-tuner AV prend en charge plusieurs comptes utilisateur, ce qui signifie que vous pouvez librement commuter entre plusieurs connexions. Après avoir Procédures courantes dans le menu de Utilisation de Rhapsody (Etats-Unis enregistré...

  • Page 113: Pandora ® Internet Radio -Pour Commencer (États-Unis Uniquement)

    Don’t play the song for a month : la création de votre compte et de vos stations, vous pouvez retourner à votre récepteur Onkyo et appuyez Si vous en avez assez d’une chanson, vous pouvez sur entrée pour écouter votre webradio Pandora mettre la chanson «...

  • Page 114: Utilisation De Rhapsody (Etats-Unis Uniquement)

    RANDOM, REPEAT compte, vous pouvez en créer un à partir de meilleures pistes, des nouveautés et des sélections du www.rhapsody.com/onkyo Remarque personnel. Si vous possédez déjà un compte Rhapsody, • Sur les canaux Rhapsody, certaines touches ne fonctionnent Rhapsody Channels : sélectionnez «...

  • Page 115: Utilisation De Siriusxm Internet Radio (Amérique Du Nord Uniquement)

    Si vous possédez déjà un compte SIRIUS, vous Les abonnements SiriusXM Internet Radio sont vendus Votre ampli-tuner AV Onkyo comprend un essai gratuit de pouvez y accéder en sélectionnant « Sign In ». séparément et sont subordonnés par les conditions Sirius SiriusXM Internet Radio.

  • Page 116: Utilisation De La Webradio Last.fm

    Account Info : vous y connecter pour sélectionner « Sign in to your Votre nouvel ampli-tuner AV Onkyo est très intelligent. Si account ». Saisissez votre nom utilisateur et votre mot Vérifiez les informations de votre compte. vous avez un compte Last.fm gratuit, il garde une trace de de passe dans l’écran clavier suivant.

  • Page 117: Utilisation De Slacker Personal Radio

    Utilisation d’une webradio Vous pouvez contrôlez les pistes avec les touches sur Utilisation de Slacker Personal Radio la télécommande. Si vous ne possédez pas de compte, créez-en un à Boutons activés : partir du site Web de Slacker (www.slacker.com) à ■...
  • Page 118 Uso de Internet Radio Uso de Internet Radio Uso de múltiples cuentas Pandora ® Internet Radio –Primeros pasos (solo EE.UU.) ..........2 El receptor de AV permite múltiples cuentas de usuario, lo que quiere decir que se puede cambiar libremente Procedimientos comunes en el menú...

  • Page 119: Pandora ® Internet Radio -Primeros Pasos (Solo Ee.uu.)

    Don’t play the song for a month: receptor Onkyo y pulsar Enter para empezar a Si se cansa de una canción, puede “silenciarla” de PANDORA, el logotipo de PANDORA logo, y la imagen escuchar su radio por Internet personalizada de modo que Pandora no la reproduzca durante un mes.

  • Page 120: Uso De Rhapsody (Sólo Ee.uu.)

    Puede controlar las pistas con los botones del mando a todavía no tiene una, puede crear una nueva en distancia. Puede reproducir canciones por géneros, artistas www.rhapsody.com/onkyo principales, álbumes principales o canciones Botones activados: Si ya tiene una cuenta Rhapsody, seleccione “Sign in principales, novedades, selección del sitio.

  • Page 121: Uso De Siriusxm Internet Radio (Solo Norteamérica)

    Las suscripciones a SiriusXM Internet Radio se venden por seleccionando “Sign In”. Escriba su nombre de Su receptor de AV Onkyo incluye una prueba gratuita de separado y se rigen por las condiciones de Sirius (consulte usuario y contraseña en la pantalla de teclado que SiriusXM Internet Radio.

  • Page 122: Uso De Last.fm Internet Radio

    Si se suscribe podrá disfrutar de lo mejor de Last.fm Radio Consejo se reproduce. sin anuncios en su receptor de AV Onkyo sin necesidad de • Si desea utilizar múltiples cuentas de usuario, consulte “Uso Ban this track: un ordenador.

  • Page 123: Uso De Slacker Personal Radio

    Uso de Internet Radio Puede controlar las pistas con los botones del Uso de Slacker Personal Radio mando a distancia. Si no tiene una cuenta, cree una en el sitio web de Botones activados: Slacker (www.slacker.com) con su ordenador. ■ Elementos del menú...
  • Page 124 Y1203-2 SN 29401189B (C) Copyright 2012 Onkyo Sound & Vision Corporation Japan. All rights reserved. * 2 9 4 0 1 1 8 9 B *...
  • Page 125 Using Internet Radio Using Internet Radio Using Multiple Accounts Using Last.fm Internet Radio ......2 The AV receiver supports multiple user accounts, which means you can freely switch between several logins. Common Procedures in Internet Radio After registering user accounts, login is performed from Menu the “Users”...
  • Page 126 Last.fm is a music service that learns what you love... Tracks”, “Library” and “Neighbours”. If you have the existing Last.fm account, you can sign Your new Onkyo AV receiver is very clever. If you have a Account Info: in to your account to select “Sign in to your free Last.fm account, it will keep track of all the songs...
  • Page 127 Internetradio verwenden Internetradio verwenden Verwendung mehrerer Konten Verwendung von Last.fm Internet Radio ..2 Der AV-Receiver unterstützt mehrere Nutzerkonten, was bedeutet, dass Sie frei zwischen mehreren Logins Allgemeine Verfahren bei den umschalten können. Nach der Anmeldung der Internetradio-Menüs Nutzerkonten wird das Login vom „Users“ Bildschirm aus vorgenommen.
  • Page 128 Sender wiedergeben („Your Library“, „Your Die aktuellen Nutzungspreise und umfassende Infos sind Neighbourhood“ und „Your Recommendations“). unter www.last.fm/subscribe erhältlich Y1112-1 SN 29401229 (C) Copyright 2012 Onkyo Sound & Vision Corporation Japan. All rights reserved. * 2 9 4 0 1 2 2 9 *...
  • Page 129 Remote Control Codes Remote Control Codes While holding down the REMOTE MODE button to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/Remote indicator lights. On Integra products, button names are capitalized. For example, “Remote Mode” button and “Display”...
  • Page 130 Remote Control Codes Codes de télécommande Códigos de control remoto Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez Manteniendo pulsado el botón REMOTE MODE para el cual desea introducir un associer un code, pressez et maintenez enfoncé le bouton [DISPLAY] (pendant código, pulse y mantenga presionado el botón [DISPLAY] (aproximadamente 3 environ 3 secondes).
  • Page 131 Remote Control Codes Codici del telecomando Fernbedienungscodes Tenendo premuto il tasto REMOTE MODE al quale si desidera assegnare il Halten Sie die REMOTE MODE-Taste gedruckt, fur die Sie den Code eingeben codice, premere e tenere premuto [DISPLAY] (per circa 3 secondi). mochten, und drucken Sie (ca.
  • Page 132 Remote Control Codes Afstandsbedieningscodes Fjärrstyrningskoder Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code Håll ned knappen för det REMOTE MODE som du vill tilldela en kod samtidigt wilt toewijzen de [DISPLAY] toets ingedrukt (ongeveer 3 seconden). som du trycker och håller ned [DISPLAY] (i cirka 3 sekunder).
  • Page 133 Remote Control Codes 遥控代码 按住想指定编码的 REMOTE MODE （遥控模式）按钮的同时，按住 [DISPLAY （显示）] （大约 3 秒钟） 。 REMOTE MODE （遥控模式）按钮 / 遥控指示灯亮起。 Integra 产品上的按钮名称单词首字母大写。例如， “Remote Mode （遥控模 式） ”按钮和 “Display （显示） ”按钮。 注意： • [RECEIVER （接收机）] 和多区域按钮不能输入遥控编码。 • • 只能为 [TV （电视）] 输入电视遥控编码。 •...
  • Page 134 Remote Control Codes Dedicated Onkyo Receiver Cable Set Top Box Cable Set Top Box Cable/PVR Combination Default 62503 mio TV 02802 Toshiba 01509 Samsung 01877 Zone 2 62506 Motorola 01376, 00858, 01562, 01582 Scientific Atlanta 01877, 01982 01982, 01998, 02378...
  • Page 135 Aiwa 70157 Marantz 40029 Memorex 70032 Technics 70029, 70303 Arcam 70157 Myryad 40029 Meridian 70157 Thorens 70157 Atoll Electronique 70157 Onkyo 42157 Micromega 70157 Thule Audio 70157 Audio Research 70157 Optimus 40027 Miro 70000 Traxdata 70626 Audiolab 70157 Philips 40029...
  • Page 136 01251, 01334, 01626 Boston 01251 DigiQuest 01300, 01457, 01631 00775 Receiver Boxer 01458 Digisky 01457 Gold Box 00853 Onkyo 52503 British Sky 00847, 01175, 01662 DigitalBox 01100, 01631 Gold Vision 01631 Broadcasting Digiwave 01631 GoldMaster 01334 Satellite Set Top Box...
  • Page 137 Remote Control Codes Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Hama 01567 Leiko 01626 Pace 00847, 00853, 00887, Sat Industrie 01611 01175, 01323, 01356, Hanseatic 01100 Lemon 01334 SAT+ 01409 01423, 01662, 01693, Hirschmann 00173 Lenoxx...
  • Page 138 Remote Control Codes Satellite Set Top Box Satellite Set Top Box SAT/PVR Combination SAT/PVR Combination Star 00887 00642 BskyB 01175, 01662 Schneider 01206 Stream System 01300 00879, 01356 Bush 01645 Sedea Electronique 01206 Strong 00853, 00879, 01284, United 01251, 01626, 02418 Canal Satellite 02657 01175, 01662, 01693,...
  • Page 139 Remote Control Codes Television Television Television Television Akai 10178, 10556, 10037, Basic Line 10556, 10037, 10668, Casio 10037 Dick Smith 10698 10714, 10715, 10208, 11037 Electronics Cathay 10037 11675 Baur 10037, 10195, 10512 Digatron 10037 10037 Akiba 10037 Beaumark 10178 Digihome 11667 Centrum...
  • Page 140 Remote Control Codes Television Television Television Television Erres 10037 Genesis 10037 Hisense 10556, 10508, 10208, 10037 11363, 12098 10171 Genexxa 10037 11709 Hitachi 10150, 10178, 10037, 10037 10171, 11864, 11886 Jinfeng 10208 10634, 11037, 10508, Euroman 10037 Godrej 11585 Jinxing 10556, 10037, 10698 10499, 10578, 11576, Europa...
  • Page 141 10037, 10714, 10668, Medion 10556, 10037, 10714, Naiko 10037 Onix 10698 11037, 12001 10668, 11037, 10698, Nakimura 10037 Onkyo 11807, 13100, 13500 10512, 11248, 11585, Linsar 11585 National 10508, 10208 11667, 11709 11667, 12001, 12719 Local India TV 10208 10178, 10653, 10508,...
  • Page 142 Remote Control Codes Television Television Television Television Phoenix 10037 Reflex 10037, 10668, 11037 Sei-Sinudyne 10037 SunBriteTV 11610 Phonola 10556, 10037 Relisys 11585 Serie Dorada 10178 Sungoo 11248 Pioneer 10037, 10698, 10512, Remotec 10171, 10037 Shanghai 10208 Sunny 10037 11457, 11636, 12171 Reoc 10714 Sharp...
  • Page 143 Remote Control Codes Television Television Television Technosonic 10556, 10625, 10499, Toyoda 11709 11365, 12098 Humax 20739 11324 TRANS-continents 10556, 10037, 10668, Walker 11667 Panasonic 20614, 20616 Techvision 11709 11037 Waltham 10037, 10668, 11037 Philips 20739 Techwood 11037, 11667 Transonic 10037, 10698, 10512, Wansa 12098 ReplayTV...
  • Page 144 Alba 30539, 30713 30741 Dynex 32596 30503, 30539, 30623, Ambiance 33052 30741, 31602 30867, 31597, 31602, Dyon 33052 Amstrad 30713 Onkyo 30503, 30627, 31612, 32855 eBench 31152 32147, 30571, 31634 Anthem 32820 Kendo 30713 Elfunk 30713 Oppo 30575, 32545 Aristona...
  • Page 145 32414, 32432, 33444 Vizio 32563 Pioneer 30631, 32860 Skantic 30539, 30713 Momitsu 33052 Vtrek 32587 30646 SM Electronic 31152 Onkyo 32147, 32900, 32910, Waltham 30713 30522 33100, 33101, 33500, Smart 30713 Wellington 30713 33501 Samsung 30490, 31635 Sony 30533, 30864, 31033,...
  • Page 146 HD-DVD Odys 12719 Integra 32901, 33104 33504 Panasonic 12170 30741 Philips 11454, 10556, 11394, 30539 Microsoft 32083 Powerpoint 10698 Onkyo 32901, 33104 33504 Prosonic 12001 Xbox 32083 Pvision 12001 TV/DVD Combination 12746, 12932 Akai 11675 Schaub Lorenz 12001 Black Diamond...
  • Page 147 Remote Control Codes Memo...
  • Page 148 Y1112-1 SN 29401094 (C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. * 2 9 4 0 1 0 9 4 *...

This manual is also suitable for:

Ht-r791

Table of Contents