Appendix A - Enable/Disable Hyper-Threading - Compaq Evo Workstation w6000 White Paper

Hyper-Threading Technology, New Feature of Intel Xeon Processor White Paper
Appendix A — Enable/Disable Hyper-Threading
IMPORTANT: Check and verify that your system was flashed with the latest Compaq
ROMPAQ version v01.15 or later, as shown in the lower left corner at the boot screen. Download
the latest ROMPAQ at the Compaq website
To enable or disable the Hyper-Threading technology on the Compaq Evo Workstations W6000
and W8000, follow these steps:
Figure 17:
1. When you power-up the system, you see the screen shown in Figure 17. Press F10 to enter
the setup option. After a few seconds, your screen goes into the setup mode.
2. Select the language according to your region by using the Up or Down arrow key. In this
case, select English and press the Enter key. See Figure 18.
167T-0202A-WWEN
http://www.compaq.com
22