Dell OptiPlex 9010 AIO Owner's Manual page 39

Option
Boot List Option
Date/Time
Table 3. System Configuration
Option
Integrated NIC
SATA Operation
Drives
SMART Reporting
USB Configuration
Description
This option controls the on-board LAN Controller.
• Disabled — The internal LAN is off and not visible top the operating system.
• Enabled — The internal LAN is enabled.
• Enabled w/PXE (selected by default) — The internal LAN is enabled (with
PXE boot).
• Enabled w/ImageServer — The internal LAN is enabled (with ImageServer
boot).
This option configures the operating mode of the integrated SATA hard drive
controller.
• Disabled — SATA controllers are hidden.
• ATA — SATA is configured for ATA mode.
• AHCI (selected by default) — SATA is configured for AHCI.
• RAID On — configured to support RAID mode (Intel Rapid Restore
Technology).
This option lets you enable or disable various drives on board. By default the options
are enabled.
• SATA-0
• SATA-1
This field controls if the hard drive errors for the integrated drives are reported
during system startup. This technology is part of the SMART (Self Monitoring
Analysis and Reporting Technology) specification.
• Enable SMART Reporting - This option is disabled by default.
This field configures the integrated USB controller. If
system is allowed to boot any type of USB mass storage devices (HDD, memory key,
floppy).
If USB port is enabled, device attached to this port is enabled and available for
operation system.
Description
• Onboard NIC
• Legacy
• UEFI
This option controls the system date and time. Changes to
the date and time take effect immediately.
• MM /DD /YY
• HH: MM: SS: A/P
Boot Support is enabled, the
39