Replacing The Computer Cover - Dell OptiPlex 330 Quick Reference Manual

Quick reference
Hide thumbs Also See for OptiPlex 330:
Table of Contents

Advertisement

Available languages

Available languages

5
SATA drive connectors
(SATA0, SATA1)
7
power connector
(POWER)
9
RTC reset jumper (RTCRST)
11 battery socket (BATTERY)
13 PCI card connectors
(SLOT2 and SLOT3)
15 serial/ PS/2 connector (PS2/SER2)
17 floppy drive connector (FLOPPY)

Replacing the Computer Cover

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
1 Ensure that all cables are connected, and fold cables out of the way.
2 Ensure that no tools or extra parts are left inside the computer.
3 To replace the cover:
Align the bottom of the cover with the hinge tabs located along the
a
bottom edge of the computer.
Using the hinge tabs as leverage, rotate the cover downward to close it.
b
Snap the cover into place by pulling back on the cover release latch
c
and then releasing the latch when the cover is properly seated.
Ensure that the cover is seated correctly before moving the computer.
d
6
front-panel connector
(FRONTPANEL)
8
SATA drive connectors
(SATA2, SATA3)
10 password jumper (PSWD)
12 PCI Express x16 card connector
(SLOT1)
14 internal buzzer (SPKR)
16 fan connector (FAN_CPU)
Quick Reference Guide
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents