Table of Contents
Advertisement
Table 6:
Commands supported by Cheetah NS SAS family drives (continued)
Command name
FUA bit
Write Long
Write Same
PBdata
LBdata
XDRead
XDWrite
XPWrite
[1]
Cheetah NS drives can format to 512, 520, 524, or 528 bytes per logical block.
[2]
Warning. Power loss during flash programming can result in firmware corruption. This usually makes the
drive inoperable.
[3]
Reference Mode Sense command 1Ah for mode pages supported.
[4]
Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
46
Command code
Supported
Y
3Fh
Y
41h
Y
N
N
52h
N
50h
N
51h
N
Cheetah NS SAS Product Manual, Rev. A
Advertisement
Table of Contents
