LG M4210D-B21 User Manual page 10

Connecting to External Devices
8.
Select gray monitor icon and then press the right button of the mouse.
1
2
Select 'Clone Main with monitor' menu.
9.
10.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
Or, press the SOURCE button at the back side of the product.
SOURCE
• Select RGB : 15-pin D-Sub analog signal.
•
Note
•
1
2
SET
AUTO/SET
How to connect to two computers.
DVI
Connect the signal cables (
Press the INPUT button in a remote control to select the computer to use.
Directly connect to a grounded power outlet on the wall or a power bar with a ground
wire.
Click 'Yes' button.
and D-Sub) to each computer.
9
INPUT
RGB
DVI