Table of Contents
Advertisement
Connecting to External Devices
2.
1
Turn on power by pressing the power button on the product.
Turn on the PC.
2
3.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
Or, press the SOURCE button at the back side of the product.
SOURCE
A
When connecting with a D-Sub signal input cable.
• Select RGB : 15-pin D-Sub analog signal.
B
When connecting with a
• Select DVI :
•
How to connect to two computers.
Note
Connect the signal cables (
Press the INPUT button in a remote control to select the computer to use.
•
Directly connect to a grounded power outlet on the wall or a power bar with a ground
wire.
SET
AUTO/SET
DVI
signal input cable.
DVI
Digital signal.
DVI
SOURCE
AUTO/SET
Power button
INPUT
RGB
DVI
and D-Sub) to each computer.
11
ON/OFF
INPUT
RGB
DVI
Advertisement
Table of Contents
